Woods Equipment BW15LH manual Dealer Check Lists, PRE-DELIVERY Check List, Delivery Check List

Page 43

DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

Inspect the equipment thoroughly after assembly to ensure it is set up properly before delivering it to the customer.

The following check lists are a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.

NOTICE

Gearboxes are not filled at the factory. Prior to delivery, make sure each gearbox is filled between lowest ring and end of dipstick with 80 or 90W API GL-4 or GL-5 gear lube.

___ Check that all safety decals are installed and in good condition. Replace if damaged.

___ Check that shields and guards are properly installed and in good condition. Replace if dam-

 

aged.

___

Check all bolts to be sure they are properly

 

torqued.

___

Check wheel bolts for proper torque.

___

Check that all cotter pins and safety pins are

 

properly installed. Replace if damaged.

___

Check that blades have been properly installed.

___

Check and grease all lubrication points as identi-

 

fied in lubrication information on page 20.

___

Check the level of gearbox fluids before delivery.

 

Service, if required, as specified in the lubrication

 

information on page 20.

DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

___ Show customer how to make adjustments and select proper PTO speed.

___ Show customer how to make sure driveline is properly installed and that spring-activated lock- ing pin or collar slides freely and is seated in groove on tractor PTO shaft.

___

Show customer how to determine the turning lim-

 

its of the CV PTO driveline.

___

Show customer the safe, proper procedures to be

 

used when mounting, dismounting, and storing

 

equipment.

___

Make customer aware of optional equipment

 

available so that customer can make proper

 

choices as required.

___

Instruct customer how to lubricate and explain

 

importance of lubrication.

___

Point out the safety decals. Explain their meaning

 

and the need to keep them in place and in good

 

condition. Emphasize the increased safety haz-

 

ards when instructions are not followed.

___

Explain to customer that when transporting the

 

cutter, the wing and center sections should be

 

raised and their respective transport bars

 

installed and pinned in place.

___

Present Operator's Manual and request that cus-

 

tomer and all operators read it before operating

 

equipment. Point out the manual safety rules,

 

explain their meanings and emphasize the

 

increased safety hazards that exist when safety

 

rules are not followed.

___

Explain to customer the potential crushing haz-

 

ards of going underneath raised equipment.

 

Instruct that before going underneath to discon-

 

nect the driveline, securely block up all corners

 

with jack stands and to follow all instructions in

 

the BLOCKING METHOD, page 19 of the opera-

 

tor’s manual. Explain that blocking up prevents

 

equipment dropping from hydraulic leak down,

 

hydraulic system failures or mechanical compo-

 

nent failures.

___

Point out all guards and shields. Explain their

 

importance and the safety hazards that exist

 

when not kept in place and in good condition.

___

Explain to customer that when towing on a public

 

road to comply with all state and local light-

 

ing/marking laws and to use a safety tow chain.

MAN0810 (9/24/2009)

Dealer Check Lists 43

 

 

Image 43
Contents Batwing To the Dealer IntroductionLEA EL Instructivo Table of ContentsGeneral Information SpecificationsSafety Free Mower Safety VideoTraining Package for Rotary Mowers/Cutters-English/Spanish Training Package for Rotary Mowers/Cutters-EnglishPreparation Safety RulesInstallation TrainingOperation TransportationMaintenance Storage Be Careful Safety & Instructional DecalsKeep Away Safety Hydraulic Connection Connecting Cutter to TractorOperation OperationTractor Operation Cutting Height AdjustmentInterference Check CV Driveline Turning LimitsMowing Tips Cutter OperationShredding Lock-Up TransportingOwners Responsibility PRE-OPERATION Check ListOwner Service Owner ServiceBlocking Method Driveline Lubrication LubricationGearbox Lubrication Blade Removal Figure Blade Installation FigureSeasonal Lubrication BladesBlade Sharpening Slip Clutch Adjustment FigureShielding Repair CleaningServicing Tires Safely Troubleshooting TroubleshootingSeal Replacement Figure Dealer ServiceDealer Service Gearbox MaintenanceDisassemble Gearbox Vertical Shaft Seal Repair Spindle BOXHorizontal Shaft Seal Repair Spindle Gearbox Repair Remove Gearbox from CutterSpindle Gearbox Assembly Assemble Gearbox Reinstall GearboxAssembly DisassemblySplitter Gearbox Repair Figure Removal from Cutter Check Gearbox Reinstallation on CutterCrossbar Removal Crossbar RemovalJoint Disassembly Crossbar InstallationUniversal Joint Repair Joint Assembly Assembly Instructions AssemblyDealer SET-UP Instructions Install SMV Emblem Install Height Adjustment CylinderInstall Tongue Install Wheel and HubInstall Wing Install CV DriveInstall Wing Cylinder & Lock-up Bar Left Wing Lock-Up Bar Installed Install Wing Wheel and Hub FigureInstall Wing Driveline Install Wing Wheel Yoke Adjustment LinkInstall Hose Kit Chain Shielding Installation Center Section Install Chain or Belt ShieldingChain Shielding Installation Right Wing Shown Belt Shielding Installation Right Wing Delivery Check List Dealer Check ListsDealer Check Lists PRE-DELIVERY Check ListMAN0810 9/24/2009 BW15LH PartsMain Frame Assembly Front Section Part QTY Description Main Frame Assembly Rear Section Hydraulic cylinder 3 x 8 see Wing Assembly Part QTY Description Splitter Gearbox Assembly Shaft 1-3/4, 20 spline, center Wing & Center Gearbox Assembly Wing & Center Gearbox Assembly Center Deck Drive Assembly CV Drive Assembly Wing Drive Assembly Walterscheid NSS Wing Drive Assembly Bodioli and PavesiBolt Wheel & Tire Assembly Rubber Shielding Center Section Standard Front & Rear Rubber Shielding Wing Standard Front & Rear Chain Shielding Center Section Optional Front & Rear Chain Shielding Wing Optional Front & Rear Hydraulic Cylinders Hydraulic Cylinder Stroke Control KIT Crossbar Puller OptionalWinch KIT Optional Winch Kit InstallationWinch Kit Operation Metric Series Bolt Torque ChartSAE Series Torque Chart AppendixAbbreviations Bolt Size ChartIndex IndexWarranty Warranty