Shindaiwa DG1000MI manual Connection, Installation, Selecting Cable

Page 19

6.2Installation

Danger

:Suffocation from exhaust fume

￿Exhaust fume from the engine contains many elements harmful to human. Do not operate this equipment in poorly ventilated area, such as inside a room or in a tunnel

Caution

:Suffocation from exhaust fume

￿Do not point the exhaust fume toward pedestrians or building.

Caution

:Fire

￿Always operate this equipment on flat surface and, at least 1 meter away from any objects (wall, box, etc.).

￿Temperature around muffler and exhaust can get extremely high. Keep any inflammable items (such as fuel, gas, paint, etc.) away from the equipment.

￿Always set the equipment on hard, flat surface.

￿Keep the equipment at least 1m from a wall or any obstacles, to allow workable space to access the control panel and opening of the panel door.

<Caution>

￿This equipment must be operated on hard and flat surface. Operating under any other conditions may result in malfunctions.

￿Do not block the airflow from radiator vent or muffler exhaust. It may result in reduced engine performance, overheating, or damage to the electrical parts.

￿Operating in dusty area or salty air (by the ocean), or any other particulate environment may result in clogged radiator, which may cause overheating, other malfunctions and insulation deterioration. Use extreme care, frequent checks and maintenance.

7 Connection

7.1 Selecting Cable

Select the cable with proper gauge, based on its allowable amperage and the distance between the generator and the machinery to be connected.

- 19 -

Image 19
Contents DG1000MI Introduction Injuries Safety GuidelinesSuffocation from exhaust fume Electrical ShockBurns Injuries to eyes and skinExplosion FireInjuries Location of Warning labels Specification Matrix SpecificationsAmbient Condition Use PartsExternal view Control panel Monitor Display EquipmentEngine Oil Monitoring Lamp for oil pressure low Injuries Hour Meter built into the Tachometer Battery Charge Monitoring Lamp charge lampWater Temperature Gauge GaugesFrequency Meter Fuel GaugeGenerator Gauges Amp MeterPanel Light / Pilot Lamp Switch Starter SwitchEmergency Stop button Voltage Regulator and Throttle Lever Amp Meter Changeover SwitchThermal Relay Earth Leakage Relay Unit Fuel Line Changeover Valve 3-way valve Using fuel from built-in fuel tank< > Transportation Transport and InstallationTransportation Lifting EquipmentConnection InstallationSelecting Cable Electrical damages Load Connection Terminal Plate 3-Phase For 3-Phase Load Connecting CableFor 1-Phase Load1 2 1-Phase Output Terminals & Receptacles For 1-Phase Load2Grounding Work Earth Leakage Relay and GroundingOperation Check Electrical Shock Fire Burns Initialization and pre-checkEarth leakage breaker relay has activated Electrical Shock InjuriesSelecting proper engine oil Checking Engine OilEngine Oil Capacity Checking Radiator / Adding water Checking Coolant/waterChecking Coolant reservoir tank / Adding coolant Coolant Capacity Checking Fan BeltTension Condition Checking FuelChecking Fuel, Engine Oil, and Water leakage Checking BatteryReplacing the battery Initializing / preparation OperationFrequency Adjust Screw Damages to the property 200/400 Voltage Changeover Dual Voltage SystemDuring operation Refer to 7-2. Connecting cableFeature List Protection FeaturesStopping the Generator During Operation section Connecting to External Fuel TankMaintenance Generator side Engine SideReplace, refer to 8-1 Checking Engine Oil 10.1 Oil ChangeCleaning / Changing Air Filter Element Draining Water from Water Separator Cleaning / Changing Fuel FilterClean gauze filter in engine feed pump Clean gauze filter in water separatorIsuzu Part No 8970631550 Draining Water from Fuel Tank Long-term Storage Storage ProceduresStacking Troubleshooting Ask our distributor to repair Page Generator Wiring Diagram Engine Wiring Diagram