Shindaiwa EB212, 82051 manual Long Term Storage Over 30 Days

Page 20

English

Storage

WARNING

During operation the muffler or catalytic muffler and surrounding cover becomes hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result.

Long Term Storage (Over 30 Days)

Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte- nance which includes the following:

1. Store unit in a dry, dust free place, out of the reach of children.

WARNING

Do not store where fuel fumes may accumulate or reach an open flame or spark.

2.Place the stop switch s in the "STOP" position.

3.Remove accumulation of grease, oil, dirt and debris from exterior of unit.

4.Perform all periodic lubrication and services that are required.

5.Tighten all screws and nuts.

6.Drain the fuel tank completely and pull the recoil starter handle several times to remove fuel from the carburetor.

7.Remove the spark plug and pour 7cc (1/4 oz.) of fresh, clean Shindaiwa 2-stroke engine oil into the cylinder through the spark plug hole.

A.Place a clean cloth over the spark plug hole.

B.Pull the recoil starter handle 2-3 times to distribute the oil inside the engine.

C.Observe the piston location through the spark plug hole. Pull the recoil handle slowly until the piston reaches the top of its travel and leave it there.

8.Install the spark plug (do not connect ignition cable).

9.Remove blower pipe assembly from unit.

20

Image 20
Contents EB212 Blower Operator’s manual Table of ContentsIntroduction Personal condition and safety equipment Safety Manual safety symbols and important informationInternational symbols Physical Condition Eye ProtectionHand Protection Breathing ProtectionRepetitive Stress Injuries Read the ManualsClear the Work Area Keep a Firm GripEPA Phase 2/ C.A.R.B. Tier Equipment checkEmission Control Product Emission DurabilitySound Label DescriptionContents Install Blower Pipes AssemblyBlower application Operation FuelMetric Fuel RequirementsHandling Fuel Starting cold engine Purge BulbStarting warm engine Stopping engineOperating blower Skill levels MaintenanceMaintenance intervals Air filter Fuel filterSpark plug Cooling systemSpark Arrestor Screen Exhaust systemHigh Altitude Adjustment Carburetor adjustmentCylinder Exhaust Port Engine Break-InTroubleshooting Troubleshooting ChartLong Term Storage Over 30 Days StorageSpecifications Model EB212 Hand HeldManufacturers Warranty Coverage Owners Warranty ResponsibilitiesWhat does this Warranty COVER? HOW will a Covered Part be CORRECTED?English English Sopladora EB212 Tabla de materias IntroducciónEl manual del operador Símbolos internacionales Condición personal y equipos de seguridadCondición física Protección de los ojosProtección de las manos Protección respiratoriaLesiones debidas a esfuerzos repetitivos PeligroControl de emisiones Fase 2 de EPA / Nivel III de C.A.R.BCompruebe el equipo Categoría DescripciónContenido Instale los tubos del soplador MontajeAplicación del soplador OperaciónImportante Requisitos del combustibleManipulación del combustible Arranque del motor en frío NotaArranque con el motor caliente Parada del motorOperación del soplador ¡IMPORTANTE MantenimientoNivel de habilidad Filtro de aire Filtro de combustibleBujía Sistema de enfriamientoRejilla del apagachispas Sistema de escapeOrificio de escape del cilindro Rodaje del motorAjuste de altitud elevada Ajuste del carburadorLocalización y reparación de fallas Almacenamiento a largo plazo más de 30 días AlmacenamientoEspecificaciones ModeloRelacionados CON LAS Emisiones EPA Phase California Tier III Emissions Defect Warranty ENRelacionados CON Emisiones EPA Phase 2 / California Piezas Cubiertas POR LA Garantía Contra DefectosNotas Asaminami-Ku, Hiroshima EB212 Soufflante Le manuel d’utilisation Table des matièresCondition physique et equipement de sécurité Sécurité Symboles de sécurité et informations importantesSymboles internationaux Condition physique Protection des yeuxProtection des mains Protection des voies respiratoiresMicrotraumatismes répétés Lisez les manuelsDurabilité DU Contrôle DES Émissions Vérifiez l’équipementContrôle des émissions Autocollants de niveau sonore Sur le corps de la soufflanteContenu Installation des tubes de soufflante AssemblageUtilisation CarburantSpécifications pour le carburant Manipulation du carburantDémarrage d’un moteur froid RemarqueDémarrage d’un moteur chaud Arrêt du moteurUtilisation de la soufflante Intervalles d’entretien EntretienNiveaux de difficulte Fitlre à air Filtre a carburantBougie Système de refroidissementPare-étincelles Système déchappementLumière d’échappement du cylindre Rodage du moteurRéglage pour haute altitude Réglage du carburateurDépannage Remisage à long terme plus de 30 jours RemisageCaractéristiques Modele EB212 à mainCouverture DE LA Garantie DES Fabricants Responsabilités DU Propriétaire À L’ÉGARD DE LA GarantieEN CAS DE Pièce Défectueuse CE QUE Couvre Cette GarantieRemarques

82051, EB212 specifications

The Shindaiwa 82051 and EB212 are top-tier products that cater to a variety of outdoor maintenance needs, particularly in the realm of landscaping and gardening. Shindaiwa, a well-known name in the outdoor power equipment market, consistently delivers high-quality equipment designed for reliability and performance.

The Shindaiwa 82051 is primarily recognized as a premium brushcutter, engineered to handle tough cutting jobs with ease. One of its standout features is its powerful 22.5 cc, 2-cycle engine, which ensures robust performance and efficient fuel consumption. This engine type provides exceptional torque and power, making it capable of tackling dense vegetation.

The 82051 model also boasts a lightweight and ergonomic design that enhances user comfort and control during operation. The handlebars are designed for a relaxed grip, and the overall weight of the unit ensures that fatigue is minimized, allowing users to work longer without discomfort. Additionally, the product comes equipped with a dynamic shoulder strap that distributes the weight evenly, thus providing improved balance and maneuverability.

Commercial users will appreciate the Shindaiwa 82051's durability, as it features high-quality materials that withstand the rigors of daily use. The air filtration system is designed to reduce engine wear, prolonging the life of the machine and ensuring reliability even under rigorous conditions.

On the other hand, the Shindaiwa EB212 leaf blower is an essential tool for those in need of effective yard cleanup. This leaf blower features a powerful 21.2 cc engine, delivering an impressive airflow of up to 422 CFM (cubic feet per minute) and a maximum air speed of 165 mph. These features make the EB212 incredibly effective in managing debris, whether it be leaves, grass clippings, or other yard waste.

One of the highlighted technologies in the EB212 is the innovative two-stroke engine that ensures lower emissions without sacrificing performance, in line with environmental standards. The unit also features an ergonomic design with a comfortable grip and lightweight build, making it easy to maneuver for extended periods.

In summary, both the Shindaiwa 82051 and EB212 bring together power, efficiency, and user-centered designs. Their features cater to professionals and homeowners alike, standing out for their performance, durability, and comfort, making them indispensable tools for outdoor maintenance. Whether tackling stubborn brush or managing leaves, these machines reaffirm Shindaiwa's commitment to quality and innovation in outdoor power equipment.