Shindaiwa 82051 Safety Manual safety symbols and important information, International symbols

Page 3

Safety

manual safety symbols and important information

Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you.

English

DANGER

The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition which WILL lead to serious personal injury or death if not avoided.

WARNING

The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condi- tion which CAN lead to serious personal injury or death if not avoided.

CAUTION

The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided.

Circle and slash symbol

This symbol means the specific action shown is prohibited. Ignoring these prohi- bitions can result in serious or fatal injury.

NOTE

This enclosed message provides tips for use, care and maintenance of the unit.

IMPORTANT

The enclosed message provides information neces- sary for the protection of the unit.

International symbols

Symbol form/shape

Symbol

Symbol form/shape

Symbol

description/application

description/application

 

 

 

 

 

Read and understand

 

Fuel and oil mixture

 

Operator's Manual.

 

 

 

 

 

 

 

 

 

Wear eyes, ears and

 

Finger Severing

 

head protection

 

 

 

 

 

 

 

Hot

 

Wear hand

 

 

protection. Use

 

Surface

 

two handed.

 

 

 

 

 

Safety/Alert

 

Wear slip resis-

 

 

tant foot wear.

 

 

 

 

 

 

 

 

DO NOT allow

 

DO NOT smoke

 

flames or sparks

 

near fuel.

 

near fuel.

 

 

 

 

 

 

Symbol form/shape

Symbol

Symbol form/shape

Symbol

description/application

description/application

 

Ignition

Emergency stop

ON/OFF

 

 

Carburetoradjustment

Primer

- Low speed mixture

bulb

 

 

 

Carburetor adjustment

Carburetor adjustment

- Idle speed

- High speed mixture

 

 

Choke Control

Choke Control

"Cold Start"

"Run"

Position

Position

(Choke Closed)

(Choke Open)

personal condition and safety equipment

WARNING

Blower users risk injury to themselves and others if the Blower is used improperly or safety precautions are not fol- lowed. Proper clothing and safety gear must be worn when operating a blower.

Image 3
Contents EB212 Blower Table of Contents IntroductionOperator’s manual Safety Manual safety symbols and important information International symbolsPersonal condition and safety equipment Breathing Protection Physical ConditionEye Protection Hand ProtectionKeep a Firm Grip Repetitive Stress InjuriesRead the Manuals Clear the Work AreaProduct Emission Durability EPA Phase 2/ C.A.R.B. TierEquipment check Emission ControlDescription Sound LabelContents Operation Fuel Install Blower PipesAssembly Blower applicationFuel Requirements Handling FuelMetric Purge Bulb Starting cold engineStopping engine Starting warm engineOperating blower Maintenance Maintenance intervalsSkill levels Fuel filter Air filterCooling system Spark plugExhaust system Spark Arrestor ScreenEngine Break-In High Altitude AdjustmentCarburetor adjustment Cylinder Exhaust PortTroubleshooting Chart TroubleshootingStorage Long Term Storage Over 30 DaysModel EB212 Hand Held SpecificationsHOW will a Covered Part be CORRECTED? Manufacturers Warranty CoverageOwners Warranty Responsibilities What does this Warranty COVER?English English Sopladora EB212 Introducción El manual del operadorTabla de materias Condición personal y equipos de seguridad Símbolos internacionalesProtección respiratoria Condición físicaProtección de los ojos Protección de las manosPeligro Lesiones debidas a esfuerzos repetitivosFase 2 de EPA / Nivel III de C.A.R.B Compruebe el equipoControl de emisiones Descripción CategoríaContenido Operación Instale los tubos del sopladorMontaje Aplicación del sopladorRequisitos del combustible Manipulación del combustibleImportante Nota Arranque del motor en fríoParada del motor Arranque con el motor calienteOperación del soplador Mantenimiento Nivel de habilidad¡IMPORTANTE Filtro de combustible Filtro de aireSistema de enfriamiento BujíaSistema de escape Rejilla del apagachispasAjuste del carburador Orificio de escape del cilindroRodaje del motor Ajuste de altitud elevadaLocalización y reparación de fallas Almacenamiento Almacenamiento a largo plazo más de 30 díasModelo EspecificacionesPiezas Cubiertas POR LA Garantía Contra Defectos Relacionados CON LAS Emisiones EPA PhaseCalifornia Tier III Emissions Defect Warranty EN Relacionados CON Emisiones EPA Phase 2 / CaliforniaNotas Asaminami-Ku, Hiroshima EB212 Soufflante Table des matières Le manuel d’utilisationSécurité Symboles de sécurité et informations importantes Symboles internationauxCondition physique et equipement de sécurité Protection des voies respiratoires Condition physiqueProtection des yeux Protection des mainsLisez les manuels Microtraumatismes répétésVérifiez l’équipement Contrôle des émissionsDurabilité DU Contrôle DES Émissions Sur le corps de la soufflante Autocollants de niveau sonoreContenu Carburant Installation des tubes de soufflanteAssemblage UtilisationManipulation du carburant Spécifications pour le carburantRemarque Démarrage d’un moteur froidArrêt du moteur Démarrage d’un moteur chaudUtilisation de la soufflante Entretien Niveaux de difficulteIntervalles d’entretien Filtre a carburant Fitlre à airSystème de refroidissement BougieSystème déchappement Pare-étincellesRéglage du carburateur Lumière d’échappement du cylindreRodage du moteur Réglage pour haute altitudeDépannage Remisage Remisage à long terme plus de 30 joursModele EB212 à main CaractéristiquesCE QUE Couvre Cette Garantie Couverture DE LA Garantie DES FabricantsResponsabilités DU Propriétaire À L’ÉGARD DE LA Garantie EN CAS DE Pièce DéfectueuseRemarques

82051, EB212 specifications

The Shindaiwa 82051 and EB212 are top-tier products that cater to a variety of outdoor maintenance needs, particularly in the realm of landscaping and gardening. Shindaiwa, a well-known name in the outdoor power equipment market, consistently delivers high-quality equipment designed for reliability and performance.

The Shindaiwa 82051 is primarily recognized as a premium brushcutter, engineered to handle tough cutting jobs with ease. One of its standout features is its powerful 22.5 cc, 2-cycle engine, which ensures robust performance and efficient fuel consumption. This engine type provides exceptional torque and power, making it capable of tackling dense vegetation.

The 82051 model also boasts a lightweight and ergonomic design that enhances user comfort and control during operation. The handlebars are designed for a relaxed grip, and the overall weight of the unit ensures that fatigue is minimized, allowing users to work longer without discomfort. Additionally, the product comes equipped with a dynamic shoulder strap that distributes the weight evenly, thus providing improved balance and maneuverability.

Commercial users will appreciate the Shindaiwa 82051's durability, as it features high-quality materials that withstand the rigors of daily use. The air filtration system is designed to reduce engine wear, prolonging the life of the machine and ensuring reliability even under rigorous conditions.

On the other hand, the Shindaiwa EB212 leaf blower is an essential tool for those in need of effective yard cleanup. This leaf blower features a powerful 21.2 cc engine, delivering an impressive airflow of up to 422 CFM (cubic feet per minute) and a maximum air speed of 165 mph. These features make the EB212 incredibly effective in managing debris, whether it be leaves, grass clippings, or other yard waste.

One of the highlighted technologies in the EB212 is the innovative two-stroke engine that ensures lower emissions without sacrificing performance, in line with environmental standards. The unit also features an ergonomic design with a comfortable grip and lightweight build, making it easy to maneuver for extended periods.

In summary, both the Shindaiwa 82051 and EB212 bring together power, efficiency, and user-centered designs. Their features cater to professionals and homeowners alike, standing out for their performance, durability, and comfort, making them indispensable tools for outdoor maintenance. Whether tackling stubborn brush or managing leaves, these machines reaffirm Shindaiwa's commitment to quality and innovation in outdoor power equipment.