Shindaiwa 82051, EB212 manual Install Blower Pipes, Assembly, Blower application, Operation Fuel

Page 9

Assembly

WARNING

Never perform maintenance or assembly procedures with engine running or serious personal injury may result.

blower application

Install Blower Pipes

1.Align grooves in straight pipe with pegs on blower housing and slide pipe onto housing.

2.Turn straight pipe clockwise to lock into place.

3.Align grooves in fan head nozzle with pegs on straight pipe and slide fan head nozzle onto straight pipe.

4.Turn fan head nozzle clockwise to lock into place.

Operation

NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual.

fuel

WARNING

Alternative fuels, such as E-20 (20% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa 2-stroke gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

English

Image 9
Contents EB212 Blower Table of Contents IntroductionOperator’s manual Safety Manual safety symbols and important information International symbolsPersonal condition and safety equipment Eye Protection Physical ConditionHand Protection Breathing ProtectionRead the Manuals Repetitive Stress InjuriesClear the Work Area Keep a Firm GripEquipment check EPA Phase 2/ C.A.R.B. TierEmission Control Product Emission DurabilityDescription Sound LabelContents Assembly Install Blower PipesBlower application Operation FuelFuel Requirements Handling FuelMetric Purge Bulb Starting cold engineStopping engine Starting warm engineOperating blower Maintenance Maintenance intervalsSkill levels Fuel filter Air filterCooling system Spark plugExhaust system Spark Arrestor ScreenCarburetor adjustment High Altitude AdjustmentCylinder Exhaust Port Engine Break-InTroubleshooting Chart TroubleshootingStorage Long Term Storage Over 30 DaysModel EB212 Hand Held SpecificationsOwners Warranty Responsibilities Manufacturers Warranty CoverageWhat does this Warranty COVER? HOW will a Covered Part be CORRECTED?English English Sopladora EB212 Introducción El manual del operadorTabla de materias Condición personal y equipos de seguridad Símbolos internacionalesProtección de los ojos Condición físicaProtección de las manos Protección respiratoriaPeligro Lesiones debidas a esfuerzos repetitivosFase 2 de EPA / Nivel III de C.A.R.B Compruebe el equipoControl de emisiones Descripción CategoríaContenido Montaje Instale los tubos del sopladorAplicación del soplador OperaciónRequisitos del combustible Manipulación del combustibleImportante Nota Arranque del motor en fríoParada del motor Arranque con el motor calienteOperación del soplador Mantenimiento Nivel de habilidad¡IMPORTANTE Filtro de combustible Filtro de aireSistema de enfriamiento BujíaSistema de escape Rejilla del apagachispasRodaje del motor Orificio de escape del cilindroAjuste de altitud elevada Ajuste del carburadorLocalización y reparación de fallas Almacenamiento Almacenamiento a largo plazo más de 30 díasModelo EspecificacionesCalifornia Tier III Emissions Defect Warranty EN Relacionados CON LAS Emisiones EPA PhaseRelacionados CON Emisiones EPA Phase 2 / California Piezas Cubiertas POR LA Garantía Contra DefectosNotas Asaminami-Ku, Hiroshima EB212 Soufflante Table des matières Le manuel d’utilisationSécurité Symboles de sécurité et informations importantes Symboles internationauxCondition physique et equipement de sécurité Protection des yeux Condition physiqueProtection des mains Protection des voies respiratoiresLisez les manuels Microtraumatismes répétésVérifiez l’équipement Contrôle des émissionsDurabilité DU Contrôle DES Émissions Sur le corps de la soufflante Autocollants de niveau sonoreContenu Assemblage Installation des tubes de soufflanteUtilisation CarburantManipulation du carburant Spécifications pour le carburantRemarque Démarrage d’un moteur froidArrêt du moteur Démarrage d’un moteur chaudUtilisation de la soufflante Entretien Niveaux de difficulteIntervalles d’entretien Filtre a carburant Fitlre à airSystème de refroidissement BougieSystème déchappement Pare-étincellesRodage du moteur Lumière d’échappement du cylindreRéglage pour haute altitude Réglage du carburateurDépannage Remisage Remisage à long terme plus de 30 joursModele EB212 à main CaractéristiquesResponsabilités DU Propriétaire À L’ÉGARD DE LA Garantie Couverture DE LA Garantie DES FabricantsEN CAS DE Pièce Défectueuse CE QUE Couvre Cette GarantieRemarques

82051, EB212 specifications

The Shindaiwa 82051 and EB212 are top-tier products that cater to a variety of outdoor maintenance needs, particularly in the realm of landscaping and gardening. Shindaiwa, a well-known name in the outdoor power equipment market, consistently delivers high-quality equipment designed for reliability and performance.

The Shindaiwa 82051 is primarily recognized as a premium brushcutter, engineered to handle tough cutting jobs with ease. One of its standout features is its powerful 22.5 cc, 2-cycle engine, which ensures robust performance and efficient fuel consumption. This engine type provides exceptional torque and power, making it capable of tackling dense vegetation.

The 82051 model also boasts a lightweight and ergonomic design that enhances user comfort and control during operation. The handlebars are designed for a relaxed grip, and the overall weight of the unit ensures that fatigue is minimized, allowing users to work longer without discomfort. Additionally, the product comes equipped with a dynamic shoulder strap that distributes the weight evenly, thus providing improved balance and maneuverability.

Commercial users will appreciate the Shindaiwa 82051's durability, as it features high-quality materials that withstand the rigors of daily use. The air filtration system is designed to reduce engine wear, prolonging the life of the machine and ensuring reliability even under rigorous conditions.

On the other hand, the Shindaiwa EB212 leaf blower is an essential tool for those in need of effective yard cleanup. This leaf blower features a powerful 21.2 cc engine, delivering an impressive airflow of up to 422 CFM (cubic feet per minute) and a maximum air speed of 165 mph. These features make the EB212 incredibly effective in managing debris, whether it be leaves, grass clippings, or other yard waste.

One of the highlighted technologies in the EB212 is the innovative two-stroke engine that ensures lower emissions without sacrificing performance, in line with environmental standards. The unit also features an ergonomic design with a comfortable grip and lightweight build, making it easy to maneuver for extended periods.

In summary, both the Shindaiwa 82051 and EB212 bring together power, efficiency, and user-centered designs. Their features cater to professionals and homeowners alike, standing out for their performance, durability, and comfort, making them indispensable tools for outdoor maintenance. Whether tackling stubborn brush or managing leaves, these machines reaffirm Shindaiwa's commitment to quality and innovation in outdoor power equipment.