North Star M1108D Before Each Use Fueling, Remove gas cap Remove engine gas cap, Add gasoline

Page 17

Before Each Use - Fueling

Step Two: Fueling

WARNING

Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel. Use extreme care when handling gasoline.

1.Engine off / cool The engine must be off and allowed to cool at least two minutes before adding fuel.

WARNING: A running engine is hot enough to ignite fuel. Never add fuel or remove gas cap if engine is running or still hot.

2. Outdoor location Fill fuel tank outdoors – never indoors.

WARNING: Gasoline vapors can ignite if they collect inside an enclosure. Explosion can result.

3. Remove gas cap Remove engine gas cap.

4. Add gasoline

Add gasoline through fill opening from a UL-approved container.

Important Safety Instructions:

•Use approved container. NEVER pump fuel directly into engine at gas station. Static charge can build and ignite fuel. Use a UL approved fuel container to transfer gas to the engine.

•Don’t overfill. DO NOT overfill the gas tank. Allow at least 1/2” of empty space below the fill neck to allow for fuel expansion

•Heat / flames / sparks. Stay away from sources of heat, flame, or sparks while adding fuel.

5.

Spills / splashes

Clean up fuel spills /splashes immediately.

 

 

1.

Move the log splitter away from spilled fuel on the ground.

 

 

2.

Wipe fuel off engine and wait 5 minutes for excess fuel to evaporate before starting engine.

 

 

3.

Gas soaked rags are flammable and should be disposed of properly.

 

 

4.

If gasoline is spilled on your skin or clothes, change clothes and wash skin immediately.

6.

Replace gas cap

Replace gas cap securely before starting engine.

7.

Gasoline storage

Store extra gasoline in a cool, dry place in a UL approved, tightly sealed container.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents M1108D Hazard Signal Word Definitions Table of Contents About Your Log Splitter Warranty RegistrationThis equipment to others About Your Log SplitterSafety Label Locations Split Control Lever Operation Description Machine Component IdentificationInitial Set-Up Wear between the keepers and beam Optional 4-Way Wedge Wings Way Wedge Wings Wing AssemblyImportant Make sure log splitter engine is off Moving and Towing to the Job SiteMoving the log splitter Attach log splitter to vehicle hitch TowingPut front outrigger leg Important safety instructions Step One Inspect and maintain log splitter before each use Before Each Use-Inspection / MaintenanceRemove debris from engine, muffler, and moving parts Check fuel tank and fuel lines for leaksHydraulic system Check the hydraulic system carefully Before Each Use-Inspection / Maintenance Add gasoline Before Each Use FuelingRemove gas cap Remove engine gas cap Before Each Use Work Site Selection & Set-Up Fire precautionsStep Three Work site selection and log splitter set-up Select locationLock both the outrigger legs in the Down position Lock both outrigger legsBlock wheels Apply grease Splitting Operation General safety informationHorizontal Set toOr vertical ClothingFingers or cause damage to the splitter Lock rear outrigger leg in down positionVertical position Correct Log Orientation Load logStop wedge Extend wedgeRemove split wood After use Return wedgeRemove split wood from area Turn off engine Remove engine debrisShort-Term Storage StoragePeriodic Maintenance As specified in spark arrestor muffler manual Any Questions, Comments, Problems or Parts Orders TroubleshootingSpecifications Parts Breakdown Exploded View 1108, 1109, 1114 Rev D ALL Summary of Important Safety Information for Operation Personal protective equipment Safety Before Use Read/instructSafety During Inspection/Maintenance Safety in Work Site Selection Safety During FuelingLoading/Unloading Safety During Use General Safety During UseSafety in Loading, Operating, and Unloading Safety After use Assembly Instructions Assembly Instructions Step Bolt Catch Pin Towbar Outrigger Leg Fasten Horizontal Beam Lock to 1114 models only Tighten Idle Control Bolts to 20 lb- ft with a wrench Return Line

M1108D specifications

The North Star M1108D is a versatile and advanced military vehicle designed to meet the rigorous demands of modern warfare. Known for its robustness and adaptability, the M1108D has been developed with state-of-the-art technologies and features that enhance its performance in diverse environments.

One of the standout features of the M1108D is its powerful drivetrain, equipped with a dependable turbocharged engine that delivers impressive horsepower and torque. This ensures the vehicle can traverse challenging terrains, whether urban landscapes or rugged off-road conditions, making it a reliable option for military operations.

The M1108D boasts an independent suspension system, providing excellent ride quality and stability, especially when navigating difficult ground surfaces. This system allows for improved handling, reducing the wear and tear on the vehicle while enhancing crew comfort during long missions.

In terms of protection, the vehicle is designed with advanced armor plating that offers a high level of ballistic and blast protection for its occupants. This ensures that personnel inside can operate with greater confidence, knowing they are shielded from potential threats. Additionally, the M1108D is equipped with upgraded defensive technologies such as smoke grenade launchers and jamming systems, further enhancing its survivability on the battlefield.

Another critical characteristic of the M1108D is its modular design, allowing for easy customization and adaptation. It can be configured for various roles, including troop transport, command and control, medical evacuation, or as a platform for weapon systems. This versatility makes it an ideal choice for diverse military operations.

The vehicle also integrates modern communication and navigation technologies, facilitating real-time coordination and situational awareness. These systems enhance operational effectiveness, allowing units to respond quickly and efficiently to evolving battlefield conditions.

Fuel efficiency is an essential aspect of the M1108D, as its engineering incorporates features that optimize consumption without compromising performance. This attribute extends operational range, ensuring that missions can be conducted with fewer logistical challenges.

Overall, the North Star M1108D exemplifies modern military vehicle design, combining durability, versatility, and advanced technological integration. Its myriad features make it a vital asset for armed forces, capable of adapting to the unpredictable nature of contemporary combat scenarios. As militaries around the world continue to evolve, the M1108D stands out as a reliable and effective solution for a range of operational needs.
Top Page Image Contents