North Star M1108D owner manual Tighten Idle Control Bolts to 20 lb- ft with a wrench

Page 44

Assembly Instructions

Step 11b

(1109 and 1114 models only)

Tighten Idle Control Bolts to 20 lb- ft with a wrench

Idle Control

Mount Plate

Idle Control

Plate

Fig 02431

Step 12

Thread the Return Line Fitting into the Filter (Finger tight plus turn 1½ to 3 additional turns)and position the hose barb up as shown

Return Line

Fitting

Fig 02436

Step 13

Remove the Plug on the outside of the Control Valve

Thread the Swivel Fitting into the Control Valve

(Tighten the Swivel Fitting finger tight and orient the fitting down as shown, tighten the nut into Control Valve with a wrench to 44-54 lb-ft)

Plug Replaced with the Swivel Fitting

Fig 02437

Image 44

Contents M1108D Hazard Signal Word Definitions Table of Contents Warranty Registration About Your Log SplitterThis equipment to others About Your Log SplitterSafety Label Locations Split Control Lever Operation Machine Component Identification DescriptionInitial Set-Up Wear between the keepers and beam Way Wedge Wings Wing Assembly Optional 4-Way Wedge WingsImportant Make sure log splitter engine is off Moving and Towing to the Job SiteMoving the log splitter Attach log splitter to vehicle hitch TowingPut front outrigger leg Important safety instructions Before Each Use-Inspection / Maintenance Step One Inspect and maintain log splitter before each useRemove debris from engine, muffler, and moving parts Check fuel tank and fuel lines for leaksHydraulic system Check the hydraulic system carefully Before Each Use-Inspection / Maintenance Add gasoline Before Each Use FuelingRemove gas cap Remove engine gas cap Fire precautions Before Each Use Work Site Selection & Set-UpStep Three Work site selection and log splitter set-up Select locationLock both the outrigger legs in the Down position Lock both outrigger legsBlock wheels Apply grease General safety information Splitting OperationSet to HorizontalOr vertical ClothingFingers or cause damage to the splitter Lock rear outrigger leg in down positionVertical position Load log Correct Log OrientationExtend wedge Stop wedgeReturn wedge Remove split wood After useRemove split wood from area Turn off engine Remove engine debrisStorage Short-Term StoragePeriodic Maintenance As specified in spark arrestor muffler manual Troubleshooting Any Questions, Comments, Problems or Parts OrdersSpecifications Parts Breakdown Exploded View 1108, 1109, 1114 Rev D ALL Summary of Important Safety Information for Operation Personal protective equipment Safety Before Use Read/instructSafety During Inspection/Maintenance Safety During Fueling Safety in Work Site SelectionLoading/Unloading Safety During Use General Safety During UseSafety in Loading, Operating, and Unloading Safety After use Assembly Instructions Assembly Instructions Step Bolt Catch Pin Towbar Outrigger Leg Fasten Horizontal Beam Lock to 1114 models only Tighten Idle Control Bolts to 20 lb- ft with a wrench Return Line

M1108D specifications

The North Star M1108D is a versatile and advanced military vehicle designed to meet the rigorous demands of modern warfare. Known for its robustness and adaptability, the M1108D has been developed with state-of-the-art technologies and features that enhance its performance in diverse environments.

One of the standout features of the M1108D is its powerful drivetrain, equipped with a dependable turbocharged engine that delivers impressive horsepower and torque. This ensures the vehicle can traverse challenging terrains, whether urban landscapes or rugged off-road conditions, making it a reliable option for military operations.

The M1108D boasts an independent suspension system, providing excellent ride quality and stability, especially when navigating difficult ground surfaces. This system allows for improved handling, reducing the wear and tear on the vehicle while enhancing crew comfort during long missions.

In terms of protection, the vehicle is designed with advanced armor plating that offers a high level of ballistic and blast protection for its occupants. This ensures that personnel inside can operate with greater confidence, knowing they are shielded from potential threats. Additionally, the M1108D is equipped with upgraded defensive technologies such as smoke grenade launchers and jamming systems, further enhancing its survivability on the battlefield.

Another critical characteristic of the M1108D is its modular design, allowing for easy customization and adaptation. It can be configured for various roles, including troop transport, command and control, medical evacuation, or as a platform for weapon systems. This versatility makes it an ideal choice for diverse military operations.

The vehicle also integrates modern communication and navigation technologies, facilitating real-time coordination and situational awareness. These systems enhance operational effectiveness, allowing units to respond quickly and efficiently to evolving battlefield conditions.

Fuel efficiency is an essential aspect of the M1108D, as its engineering incorporates features that optimize consumption without compromising performance. This attribute extends operational range, ensuring that missions can be conducted with fewer logistical challenges.

Overall, the North Star M1108D exemplifies modern military vehicle design, combining durability, versatility, and advanced technological integration. Its myriad features make it a vital asset for armed forces, capable of adapting to the unpredictable nature of contemporary combat scenarios. As militaries around the world continue to evolve, the M1108D stands out as a reliable and effective solution for a range of operational needs.