North Star M1108D owner manual Load log, Correct Log Orientation

Page 23

Splitting Operation

5. Load log

Load log onto beam with a cut end against the endplate – positioned for a lengthwise cut.

Notes:

a)The log splitter is designed only for cutting lengthwise with the grain, NOT for cutting across the grain.

b)This log splitter is designed for cutting logs only up to a maximum of 16” in diameter and 25” long. Larger diameter logs could get stuck on the wedge and longer logs will not fit on the beam.

 

FIG02218

Correct Log Orientation

Incorrect Log Orientation

WARNING: ALWAYS keep hands and feet away from the endplate, wedge, and partially split logs while loading, operating and unloading the log splitter.

Important safety instructions:

•Hold bark side. Hold the bark side of logs when loading or positioning, never the ends. Never place your hands or any part of your body between a log and any part of the log splitter.

NOTE for vertical position loading: Place the log on the endplate and turn it until it leans against the beam and is stable. If the log is too big or oddly shaped, stabilize the log with wooden shims between the log and endplate or ground. DO NOT use your leg or knee to stabilize the log. NEVER stabilize the log by placing your hand on top of the log.

•Wedge moving. NEVER load or unload logs while the wedge is moving.

•Straddling / reaching across. Never straddle, reach across, or step over the beam while the engine is running and the log splitter is in the horizontal position. You could trip, actuate the controls, and get seriously injured.

•Unsplit log pile. Do not pile logs to be split in a place that will make you reach across the log splitter in order to load them.

•Square log ends. Logs that are not cut square can slide out while splitting and become a safety hazard or cause excessive force to log splitter components. Use a chainsaw to cut logs square on each end before attempting to split them.

•Single log. Never attempt to split more than one log at a time. Pieces of log can unexpectedly be thrown from the machine causing serious injury.

•Split along grain. Do not use the log splitter to split logs across the grain. Doing so will damage the log splitter and could also cause pieces of log to be thrown, injuring the operator or bystanders.

•Changing splitting position. Do not change splitting positions (horizontal/vertical) with the engine running. You may contact the muffler and receive serious burns. Be careful to avoid contact with hot muffler even after the engine is turned off.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents M1108D Hazard Signal Word Definitions Table of Contents About Your Log Splitter Warranty RegistrationAbout Your Log Splitter This equipment to othersSafety Label Locations Split Control Lever Operation Description Machine Component IdentificationInitial Set-Up Wear between the keepers and beam Optional 4-Way Wedge Wings Way Wedge Wings Wing AssemblyImportant Make sure log splitter engine is off Moving and Towing to the Job SiteMoving the log splitter Attach log splitter to vehicle hitch TowingPut front outrigger leg Important safety instructions Check fuel tank and fuel lines for leaks Before Each Use-Inspection / MaintenanceStep One Inspect and maintain log splitter before each use Remove debris from engine, muffler, and moving partsHydraulic system Check the hydraulic system carefully Before Each Use-Inspection / Maintenance Add gasoline Before Each Use FuelingRemove gas cap Remove engine gas cap Select location Fire precautionsBefore Each Use Work Site Selection & Set-Up Step Three Work site selection and log splitter set-upLock both the outrigger legs in the Down position Lock both outrigger legsBlock wheels Apply grease Splitting Operation General safety informationClothing Set toHorizontal Or verticalFingers or cause damage to the splitter Lock rear outrigger leg in down positionVertical position Correct Log Orientation Load logStop wedge Extend wedgeTurn off engine Remove engine debris Return wedgeRemove split wood After use Remove split wood from areaShort-Term Storage StoragePeriodic Maintenance As specified in spark arrestor muffler manual Any Questions, Comments, Problems or Parts Orders TroubleshootingSpecifications Parts Breakdown Exploded View 1108, 1109, 1114 Rev D ALL Summary of Important Safety Information for Operation Personal protective equipment Safety Before Use Read/instructSafety During Inspection/Maintenance Safety in Work Site Selection Safety During FuelingLoading/Unloading Safety During Use General Safety During UseSafety in Loading, Operating, and Unloading Safety After use Assembly Instructions Assembly Instructions Step Bolt Catch Pin Towbar Outrigger Leg Fasten Horizontal Beam Lock to 1114 models only Tighten Idle Control Bolts to 20 lb- ft with a wrench Return Line

M1108D specifications

The North Star M1108D is a versatile and advanced military vehicle designed to meet the rigorous demands of modern warfare. Known for its robustness and adaptability, the M1108D has been developed with state-of-the-art technologies and features that enhance its performance in diverse environments.

One of the standout features of the M1108D is its powerful drivetrain, equipped with a dependable turbocharged engine that delivers impressive horsepower and torque. This ensures the vehicle can traverse challenging terrains, whether urban landscapes or rugged off-road conditions, making it a reliable option for military operations.

The M1108D boasts an independent suspension system, providing excellent ride quality and stability, especially when navigating difficult ground surfaces. This system allows for improved handling, reducing the wear and tear on the vehicle while enhancing crew comfort during long missions.

In terms of protection, the vehicle is designed with advanced armor plating that offers a high level of ballistic and blast protection for its occupants. This ensures that personnel inside can operate with greater confidence, knowing they are shielded from potential threats. Additionally, the M1108D is equipped with upgraded defensive technologies such as smoke grenade launchers and jamming systems, further enhancing its survivability on the battlefield.

Another critical characteristic of the M1108D is its modular design, allowing for easy customization and adaptation. It can be configured for various roles, including troop transport, command and control, medical evacuation, or as a platform for weapon systems. This versatility makes it an ideal choice for diverse military operations.

The vehicle also integrates modern communication and navigation technologies, facilitating real-time coordination and situational awareness. These systems enhance operational effectiveness, allowing units to respond quickly and efficiently to evolving battlefield conditions.

Fuel efficiency is an essential aspect of the M1108D, as its engineering incorporates features that optimize consumption without compromising performance. This attribute extends operational range, ensuring that missions can be conducted with fewer logistical challenges.

Overall, the North Star M1108D exemplifies modern military vehicle design, combining durability, versatility, and advanced technological integration. Its myriad features make it a vital asset for armed forces, capable of adapting to the unpredictable nature of contemporary combat scenarios. As militaries around the world continue to evolve, the M1108D stands out as a reliable and effective solution for a range of operational needs.
Top Page Image Contents