North Star M1108D owner manual Lock rear outrigger leg in down position, Vertical position

Page 22

Splitting Operation

b) Set to

1)

Lock rear outrigger leg in down position.

Vertical

2)

Pull out horizontal lock catch pin, grasp lifting handle and lift beam until it rotates into

position

 

vertical position.

 

 

WARNING: Crush hazard. The beam is heavy – do not let it just drop. It could crush

 

 

fingers or cause damage to the splitter.

 

 

Vertical Splitting Position

 

 

Lifting handle

Fig 02413

Rear outrigger leg

Vertical lock

Front outrigger leg

3)Lock in vertical position using catch pin through the vertical lock.

4)To return to horizontal position, unlock vertical position, grasp lifting handle and lower beam carefully in a controlled manner until it rests on the towbar, lock beam in the horizontal position with catch pin.

4. Start engine Start the engine.

See the engine owner’s manual for engine starting instructions.

NOTE:

a)Make sure the hydraulic oil is above 10°F before starting the engine. Cold hydraulic oil can damage the hydraulic pump.

b)If outdoor air temperature is below 32°F, allow log splitter to warm up by extending and returning the wedge several times before splitting wood.

WARNING:

Burns. To avoid burns, stay clear of hot muffler if you are starting a warm engine.

Carbon monoxide. The running engine gives off carbon monoxide, a poisonous gas that can kill you. You CANNOT smell it, see it, or taste it. If you start to feel sick, dizzy, or weak while using the log splitter, shut off the engine and get to fresh air RIGHT AWAY. See a doctor. You may have carbon monoxide poisoning.

Other exhaust dangers. Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Avoid inhalation of exhaust.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents M1108D Hazard Signal Word Definitions Table of Contents This equipment to others Warranty RegistrationAbout Your Log Splitter About Your Log SplitterSafety Label Locations Split Control Lever Operation Machine Component Identification DescriptionInitial Set-Up Wear between the keepers and beam Way Wedge Wings Wing Assembly Optional 4-Way Wedge WingsMoving the log splitter Moving and Towing to the Job SiteImportant Make sure log splitter engine is off Put front outrigger leg TowingAttach log splitter to vehicle hitch Important safety instructions Remove debris from engine, muffler, and moving parts Before Each Use-Inspection / MaintenanceStep One Inspect and maintain log splitter before each use Check fuel tank and fuel lines for leaksHydraulic system Check the hydraulic system carefully Before Each Use-Inspection / Maintenance Remove gas cap Remove engine gas cap Before Each Use FuelingAdd gasoline Step Three Work site selection and log splitter set-up Fire precautionsBefore Each Use Work Site Selection & Set-Up Select locationBlock wheels Apply grease Lock both outrigger legsLock both the outrigger legs in the Down position General safety information Splitting OperationOr vertical Set toHorizontal ClothingVertical position Lock rear outrigger leg in down positionFingers or cause damage to the splitter Load log Correct Log OrientationExtend wedge Stop wedgeRemove split wood from area Return wedgeRemove split wood After use Turn off engine Remove engine debrisStorage Short-Term StoragePeriodic Maintenance As specified in spark arrestor muffler manual Troubleshooting Any Questions, Comments, Problems or Parts OrdersSpecifications Parts Breakdown Exploded View 1108, 1109, 1114 Rev D ALL Summary of Important Safety Information for Operation Safety During Inspection/Maintenance Safety Before Use Read/instructPersonal protective equipment Safety During Fueling Safety in Work Site SelectionSafety in Loading, Operating, and Unloading Safety During Use General Safety During UseLoading/Unloading Safety After use Assembly Instructions Assembly Instructions Step Bolt Catch Pin Towbar Outrigger Leg Fasten Horizontal Beam Lock to 1114 models only Tighten Idle Control Bolts to 20 lb- ft with a wrench Return Line

M1108D specifications

The North Star M1108D is a versatile and advanced military vehicle designed to meet the rigorous demands of modern warfare. Known for its robustness and adaptability, the M1108D has been developed with state-of-the-art technologies and features that enhance its performance in diverse environments.

One of the standout features of the M1108D is its powerful drivetrain, equipped with a dependable turbocharged engine that delivers impressive horsepower and torque. This ensures the vehicle can traverse challenging terrains, whether urban landscapes or rugged off-road conditions, making it a reliable option for military operations.

The M1108D boasts an independent suspension system, providing excellent ride quality and stability, especially when navigating difficult ground surfaces. This system allows for improved handling, reducing the wear and tear on the vehicle while enhancing crew comfort during long missions.

In terms of protection, the vehicle is designed with advanced armor plating that offers a high level of ballistic and blast protection for its occupants. This ensures that personnel inside can operate with greater confidence, knowing they are shielded from potential threats. Additionally, the M1108D is equipped with upgraded defensive technologies such as smoke grenade launchers and jamming systems, further enhancing its survivability on the battlefield.

Another critical characteristic of the M1108D is its modular design, allowing for easy customization and adaptation. It can be configured for various roles, including troop transport, command and control, medical evacuation, or as a platform for weapon systems. This versatility makes it an ideal choice for diverse military operations.

The vehicle also integrates modern communication and navigation technologies, facilitating real-time coordination and situational awareness. These systems enhance operational effectiveness, allowing units to respond quickly and efficiently to evolving battlefield conditions.

Fuel efficiency is an essential aspect of the M1108D, as its engineering incorporates features that optimize consumption without compromising performance. This attribute extends operational range, ensuring that missions can be conducted with fewer logistical challenges.

Overall, the North Star M1108D exemplifies modern military vehicle design, combining durability, versatility, and advanced technological integration. Its myriad features make it a vital asset for armed forces, capable of adapting to the unpredictable nature of contemporary combat scenarios. As militaries around the world continue to evolve, the M1108D stands out as a reliable and effective solution for a range of operational needs.
Top Page Image Contents