MFX450_eng 11/26/02 3:21 AM Page 19
SOURCE SELECTION
SOURCE SELECT
When selecting a source by turning SOURCE SELECT, the audio and video inputs with the corresponding name are activated. The incoming signal is reproduced by all audio and
–if the source includes a video signal – video outputs of the receiver. It is possible to reassign a source selection to other than these standard inputs.
Source selected | ........Connectors used |
DVD | COAX 1 digital audio input and |
| DVD IN video input |
PHONO | PHONO IN audio input |
TUNER | The tuner part of the receiver is used, |
| all inputs are switched off. |
CD | CD IN audio input |
CDR/TAPE | CDR/TAPE IN audio input |
TV | TV IN audio input and |
| no video input |
VCR | VCR IN audio input and |
| VCR IN video input |
SAT | SAT IN audio input and |
| SAT IN video input |
6 CHANNEL-DVD/SACD INPUT selection
The 6
Reassigning a source selection
If a source is selected with SOURCE SELECT the standard audio input is used. To change this, the source selection must be reassigned to another audio input.
Example: Reassigning CD from the analog CD IN audio input to the digital COAX 2 IN audio input.
1Choose * SELECT INPUT from the menu and press NEXT 2.
2Turn SOURCE SELECT to select the source which should be reassigned (e. g. CD).
yThe name of the source is displayed and the light of the source flashes.
3Turn X MENU NAVIGATOR to select the input connectors
which should be used (e. g. CD - COAX2).
4Press ENTER / OK to confirm your selection. ySTORED is displayed briefly.
5This source selection is now using the chosen audio input (e. g. CD uses the COAX 2 IN input connectors, COAX 2 lights when switching to CD).
Using one source selection for two or more appliances
You may assign more than one source to a source selection. This can be useful when products are connected one after the other in a chain.
Example: A VCR is connected to the TV but only the TV is connected to the receiver. Both SOURCE SELECT settings, TV as well as VCR, have to use the TV input connectors.
1Choose * SELECT INPUT from the menu and press NEXT 2.
2Turn SOURCE SELECT to select the source which should be reassigned (e. g. VCR).
yThe name of the source is displayed and the light of the source flashes.
3Turn X MENU NAVIGATOR to select the input connectors
which should be used (e. g. VCR - TV IN).
4Press ENTER / OK to confirm your selection. ySTORED is displayed briefly.
5This source selection is now using the chosen audio input (e.
g. VCR uses the TV IN input connectors, VCR TV IN is displayed briefly when switching to VCR).
About 6 CHANNEL-DVD/SACD INPUT
The 6
When using the 6
From a source which is connected to the
6
English
19