MFX450_eng 11/26/02 3:21 AM Page 22
English
SURROUND SOUND
Surround sound settings
HALL
The sound reproduction is enhanced and a slight echo is added. This gives the impression of being in a large room. Can only be used in stereo mode.
SURROUND
The surround mode enables normal surround sound reproduction with 4 or 5 speakers. Depending on the source material, Dolby Surround Pro Logic, Dolby Digital or DTS is reproduced.
PRO LOGIC, DOLBY DIGITAL, DTS
In addition to SURROUND, the surround mode used – depending on the source material – will be displayed. In case of digital surround, the sound format
Example:
1 (mono) surround channel without subwoofer signal.
DTS 3/2.1 DTS, 3 front channels, 2 surround channels and a subwoofer channel.
FRONT-3 STEREO
The surround sound is muted. 3 Stereo lets you listen to surround sound without using the surround speakers.
STEREO
All sound is reproduced and played through the front left and right speakers. This enables standard stereo reproduction.
Virtual Surround
Your receiver is able to reproduce one or more forms of virtual surround sound. Virtual surround gives a more real life sound impression by creating phantom speakers in addition to or instead of real speakers. The position of the listener influences the surround effect. The area where the effect is best is shown in grey.
FRONT | CENTER | FRONT |
| ||
|
| |
LEFT |
| RIGHT |
The level of virtual surround sound effect can be adjusted in the setup menu. The following surround sound modes are available.
3D SURROUND
No rear speakers are needed. The sound of the rear channel is simulated by the front speakers. Surround sound is simulated through the front left, right and center speakers.
MULTI FRONT
Phantom speakers are created next to the left and right front speaker.
MULTI REAR
Phantom speakers are created next to the left and right rear speaker.
NATURAL SURROUND
Phantom speakers are created next to the left and right front and rear speakers.
Note: The availability of MULTI FRONT and
MULTI REAR depends on the sound channels on the source material.
NIGHT MODE (only on the remote control)
The loud parts of the sound are lowered and the soft passages are raised. You can enjoy surround sound without disturbing sleeping children or neighbors. Night mode only works with Dolby Digital, and only if supported by the source material.
22