MQ PS4030 SAW — OPERATION AND SAFETY DECALS
Machine Safety Decals
The MQ PS4030 SAW is equipped with a number of operation and safety decals.These decals are provided for operator safety and maintenance information. Should any of these decals become unreadable, replacements can be obtained from your dealer.
CAUTION
When Larger Blade and Guard is Installed, Belt Drive MUST Be Changed to Proper Size. See Owners Manual.
FAILURE TO COMPLY WITH THE C C AH
JADV EEE AV EEA OIEJGGVCBVVZ
S.M.I. MASONRY AND CONCRETE
SAW MANUFACTURER’S INSTITUTE
P/N
P
P/N 37742
Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are:
Crystallinesilicafrombricks.
Cementandothermasonryproducts.
Arsenicandchromiumfromchemically
treatedlumber.
Your risk from these exposures varies, dependingonhowoftenyoudothistype of work. To reduce your exposure to these chemicals: ALWAYS work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
P/N 20525
WARNING
TO PREVENT SERIOUS INJURY
DO NOT OPERATE SAW WITHOUT PROPER TRAINING & FULL UNDERSTANDING OF THE OWNERS MANUAL
WHEN OPERATING THIS MACHINE
KEEP ALL
GUARDS IN
PLACE
ALWAYS WEAR SAFETY APPROVED
HEARING
PROTECTION
EYE OR FACE
PROTECTION
HEAD
PROTECTION
RESPIRATOR
SMI MASONRY AND CONCRETE SAW MANUFACTURING INSTITUTE
P/N 13118 | P/N 36099 (ISO Blue) | P/N |
|
WARNING! | WARNING! |
|
|
|
| TATI | O |
| O | ||
| R |
| N |
|
|
| |
| P/N 25491 | ||
KEEP FEET | KEEP HANDS |
CLEAR | CLEAR |
P/N | P/N |
USE 15W- 40 ENGINE OIL |
|
API SERVICE CI- 4 PLUS, CI- 4, CH- 4, | |
CG- 4, CF- 4, CF/SL/SJ |
|
| P/N 37540 |
P/N 37540 |
|
| TATI | O |
O | ||
R |
| N |
|
| |
P/N 25678
P/N 21302 |
PATENT PENDING
P/N 11912
MODEL
SERIAL NO.
CONTACT
SERVICE
DEPARTMENT
P/N M600002
LUBRICATION | HOT | CHECK | BELT DRIVE |
|
|
| P/N 11246 |
|
| ||
| P/N 606004 |
| |
|
|
Figure 3. MQ PS4030 SAW Decals
PAGE 18 — MQ PS4030 SAW • OPERATION MANUAL — REV. #0 (02/29/08)