Multiquip PS403020, PS403030, PS403016, PS403026 MQ PS4030 SAW Maintenance, Air Cleaner Components

MQ PS4030 SAW — MAINTENANCE

Never blow dirt out with compressed air or try to clean with fluids. Damage can occur to the filter, and if re-installed, can result in damage to the engine.

CAUTION

Safety Air Filters are NOT intended to be used for primary air filtration. When the Primary Air Filter becomes clogged, replace it immediately. DO NOT run the saw using the Safety Filter only.

Replace the Safety Filter element every fourth Primary Filter element. See Table 8, Air and Oil Filter Chart for part numbers.

Table 8. Air and Oil Filter Chart

FILTER	PART NUMBER
Primary Air Filter	P772579
Safety Air Filter	P775300
Engine Oil Filter	306012 (Deutz #1174416-SP)
Hydraulic System Filter	306006
Fuel Filter	304010 (Donaldson #1174696)

1

Engine

This saw features a 30 HP DEUTZ Tier II diesel engine, F2L2011. Complete engine service details and recommendations can be found in the engine manufacturer's manual included with the saw.

2

19

18

17

15 4

16

2	1	6	5
3

1

14

4

3

7 11

1. Air Cleaner Case 5

2. Primary Filter Element

3.Safety Filter Element

4. Latch

5. Dust Discharge Valve

Figure 38. Air Cleaner Components

CAUTION

Operating the engine with loose or damaged air cleaner components could allow unfiltered air into the engine causing premature wear and failure.

13

9

6

10

8

12

PAGE 40 — MQ PS4030 SAW • OPERATION MANUAL — REV. #0 (02/29/08)