Multiquip DCA-400SSK Output Terminal Panel Available Voltages, Over Current Relay, Maximum Amps

DCA-400SSK — OUTPUTTERMINAL PANEL OVERVIEW

Output Terminal Panel Available Voltages

A wide range of voltages are available to supply load to many different applications. Voltages may be selected by using the voltage change-over board and how you hookup your hard wire connection to the generator. To obtain some of the voltages listed, fine adjustment with the Voltage Regulator on the control panel is necessary. See the table below (Table 8) for a list of available voltages the generator is able to supply.

TABLE 8. VOLTAGES AVAILABLE

MODEL	DCA400SSK
3 PHASE VOLTAGE	208 VOLT	220 VOLT	240 VOLT	416 VOLT	440 VOLT	480 VOLT
(RECONNECTABLE)
SINGLE PHASE	120 VOLT	127 VOLT	139 VOLT	240 VOLT	254 VOLT	277 VOLT
(ADJUSTABLE)

CAUTION :

NEVER attempt to change the Voltage Change-over board while the engine is engaged.

Over Current Relay

An over current relay is connected to the circuit breaker. In an over current situation, both the circuit breaker and the over current relay may trip. If the circuit breaker can not be reset, the reset button on the over current relay must be pressed. The over current relay is located in the control box.

Maximum Amps

The following table show the maximum amps the entire generator can provide. Do not exceed the maximum amps listed. (See Table 9)

Table 9.	Maximum Amps
Model:	DCA400SSK
Rated Voltage	Maximum Amps
Single Phase 120	888.9 amps (4 wire)
Volt
Single Phase 240	444.4 amps (4 wire)
Volt
Three Phase	962.3 amps
240 Volt
Three Phase	481.1 amps
480 Volt

PAGE 36 — DCA-400SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (09/17/01)