Desa 107624-01 Items Needed to Sharpen Chain, Sharpening Cutters, Filing Cutter Depth Gauges

Page 17

CLEANING AND

MAINTENANCE

Continued

Items Needed to Sharpen Chain

Purchase these items from your local dealer, hard- ware store, or chain saw supplies outlet.

¥5/32" round Þle

¥Depth gauge tool

¥File guide

¥Vise

¥Medium sized ßat Þle

Sharpening Cutters

Use Þle guide for 30¡ Þling.

1.Adjust chain for proper tension (see Saw Chain Tension Adjustment, pages 8 and 9).

2.Clamp guide bar in vise to hold saw steady. Note: Do not clamp chain.

3.Press 5/32" round Þle (attached to Þle guide) into groove between top plate and depth gauge on chain. File guide should rest on both top plate and depth gauge (see Figure 20). Note: File at midpoint of guide bar.

Filing Direction

30¡ Guide Mark

File Guide

5/32" Round

File

Note: This illustration shows Þle guide placement and Þling direction for sharpening cutters on left side of chain.

Figure 20 - File and File Guide Placement On Chain

Depth Gauge (right

Depth Gauge (left side of chain) side of chain)

Groove

Groove

Top Plate (left

side of chain)

Top Plate (right side of chain)

4.Hold Þle guide level. Make sure 30¡ mark on Þle guide is parallel to center of guide bar (see Figure 20). This will insure that you Þle cutters at 30¡ angle.

5.File from inside towards outside of cutter until sharp. Only Þle in this one direction (see Figure 20). Note: Two or three strokes with Þle should sharpen cutter.

6.After each cutter is sharpened, move chain for- ward to sharpen next cutter. File all cutters on one side of chain.

7.Move to other side of chain and repeat process.

Filing Cutter Depth Gauges

The cutter depth gauge clearance is reduced as cut- ters are sharpened. After every second or third sharp- ening, reset cutter depth gauges.

1.Place depth gauge tool (.025") Þrmly across top of two cutters. Make sure depth gauge enters slot in depth gauge tool (see Figure 22).

2.Use medium ßat Þle. File depth gauge level with depth gauge tool.

3.Remove depth gauge tool. With ßat Þle, round off front corner of cutter depth gauge (see Fig- ure 23).

After several hand Þlings, have authorized service center or sharpening service machine sharpen chain. This will insure even Þling.

REPLACING SAW CHAIN

Replace chain when cutters are too worn to sharpen or when chain breaks. Only use replacement chain noted in this manual.Always include new drive sprocket when replacing chain. This will maintain proper driving of chain. Note: For proper chain and drive sprocket, see Replacement Parts and Accessories, page 16.

Flat File

Depth

Gauge

Depth Gauge Tool

Depth Gauge Slot

Figure 22 - Depth Gauge Tool On Chain

Front Corner

.025"

.635 mm

ENGLISH

Right Side of Chain

Figure 23 - Round Off Front Corner Of Depth

 

Figure 21 - Chain Part Locations

 

Gauge

 

 

 

107705

17

www.desatech.com

107705-01

17

12/16/03, 4:07 PM

Page 16 Page 18
Image 17
Page 16 Page 18
Contents See pages 8 and 9 for additional information Step107705-01 12/16/03, 407 PM Listed Electric Chain SAWContents Before Operating SAW Important Safety InformationWhile Operating SAW Read ALL InstructionsKickback Kickback Safety Devices On This Saw¥ in a dry place Maintenance and Storage of Chain SAWSaw Maintenance and Kickback Safety Chain SAW Names and Terms UnpackingProduct Identification If needed, readjust guide bar nuts to finger tight only AssemblyImportant Do not clamp chain saw in vise during assembly Turn adjusting screw clockwise to Tension saw chain or SAW Chain Tension AdjustmentOiling Chain Operating Chain SAWFilling OIL Tank Cutting with the Chain SAW Extension CordsCord Length AWG Cord Size Practice until you can maintain a steady, even cutting rateFelling a Tree Cutting Down a Tree Felling Procedure Felling NotchBefore Felling a Tree Felling CutBucking a LOG Limbing a TreeEntire Length Of Log On Ground Cut log from top see FigureTrimming a Tree Pruning Log Supported On One EndLog Supported On Both Ends Cleaning SAW Body Cleaning MaintenanceNormal Guide Bar Maintenance Care of Guide BARSharpening Cutters Items Needed to Sharpen ChainFiling Cutter Depth Gauges Replacing SAW ChainReplacement Parts and Accessories Technical ServiceRepair Service StoragePower source before servicing. Severe TroubleshootingProductsÕª technical service web site at Observed Fault Possible Cause RemedyIndustries of Canada, Inc Electric Chain SAW Limited WarrantySierra Eléctrica Ensamblaje DesembalajeLimpieza Y Mantenimiento AlmacenamientoAntes DE Utilizar LA Sierra Información Importante DE SeguridadAL Utilizar LA Sierra ¥ m‡scara contra el polvo el trabajar en zonas polvorientas¥ con el dedo fuera del gatillo ContragolpesLleve la sierra elŽctrica de un lugar a otro Cuide de su sierra elŽctrica ¥ Nunca la exponga a la lluvia Mantenimiento de la cadena y seguridad contra contragolpesMantenimiento Y Almacenamiento DE SU Sierra ELƒCTRICA Retire todos los elementos del embalaje DesembalajeIdentificación DEL Producto Ensamblaje TerminologíaFigura 4 Ensamblaje de la barra de gu’a y la cadena Afloje las dos tuercas Ajuste DE Tensión DE LA Cadena SerradaImportante LUBRICACIîN USO DE LA Sierra EléctricaLUBRICACIîN DE LA Cadena Sistema de lubricaci-n manual Sistema de lubricaci-n autom‡ticoLongitud Tama-o AWG Cables DE PROLONGACIîNREALIZACIîN DE Cortes Procedimiento de tala Corte de la muesca Tala DE UN çRBOL Derribamiento de un ‡rbolTala final Antes de derribar un ‡rbolDesmembramiento DE UN çRBOL Trozado DE UN TroncoTronco apoyado en un extremo La totalidad del tronco sobre el sueloTronco apoyado sobre ambos extremos Poda DE UN çRBOLCuidado DE LA Barra DE GUêA Limpieza Y MantenimientoLimpieza DEL Cabezal Afilado DE LA Cadena Mantenimiento normal de la barra de gu’aElementos necesarios para afilar la cadena Afilado de los elementos de corteRecambio DE LA Cadena Serrada Limado de los calibradores de medida de profundidadServicio Técnico AlmacenamientoAccesorios Y Piezas DE Repuesto Servicio DE ReparaciónSOLUCIîN Diagnóstico Y Resolución DE ProblemasFalla Observada Causa Posible GARANTêA Limitada DE Sierra ELƒCTRICA Información DE GarantíaMODéLES EL-8 107624-01, 107624-02, 107625-01, 107625-02 Tronçonneuse Électrique PrimeIdentification DU Produit Remisage Service TechniqueVocabulaire DE LA TRON‚ONNEUSE Montage Utilisation DE LA TRON‚ONNEUSEAvant Dõutiliser LA TRON‚ONNEUSE Consignes DE Sécurité ImportantesPendant Lutilisation DE LA TRON‚ONNEUSE ¥ lorsquon est pressŽRecul SuiteEntretien ET Remisage DE LA TRON‚ONNEUSE Entretien de la trononneuse et protection contre le reculIdentification DU Produit Déballage¥ Garder vis et Žcrous bien serrŽs Sortir du carton toutes les picesMontage Vocabulaire DE LATronçonneuse Montage de la guide-chane et de la chane Desserrez les deux ŽcrousÉ Réglage DE LA Tension DE LA ChaîneLubrification DE LA CHAëNE Systme de lubrification manuel Remplissage DU RƒSERVOIR DõhuileRallonges ƒLECTRIQUES Utilisation DE LA TronçonneuseSystme de lubrification automatique Avant dÕabattre un arbre Abattage Dõun ArbreProcŽdure dÕabattage Sifflet dÕabattage AvertissementƑBRANCHAGE Trait dÕabattageToute la bille repose au sol TRON‚ONNAGE Dõune BilleLa bille est soutenue ˆ une extrŽmitŽ La bille est soutenue aux deux extrŽmitŽsNettoyage DU Carter DE TRON‚ONNEUSE Nettoyage ET EntretienTaille Dõun Arbre ƒlagage Entretien normal de la guide-chane Entretien DE LA GUIDE-CHAëNEAFFóTAGE DE LA CHAëNE Outils nŽcessaires pour affžter la chaneAffžtage des taillants Remplacement DE LA CHAëNELimage des limiteurs de profondeur des taillants Utiliser le guide lime pour un limage ˆ 30ûPièces DE Rechange ET Accessoires Service TechniqueService DE Réparation RemisageDƒFAILLANCE OBSERVƒE DépannageCause Possible REMéDEGarantie LIMITƒE Pour LA TRON‚ONNEUSE ƒLECTRIQUE Information SUR LA GarantieParts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE Pièces MODELS/MODELOS/MODéLES 107624-01 Renvoi Parts LIST/LISTA DE REPUESTOS/LISTE DES PiècesMODELS/MODELOS/MODéLES 107625-01, 107625-02 Continúa/À suivre Continœa/Ë suivre 107705-01 12/16/03, 408 PM Stop

107624-01 specifications

Desa 107624-01 is a cutting-edge heating solution designed to meet the demands of modern homes. Known for its remarkable efficiency and user-friendly features, this heater has garnered attention in the market, making it a popular choice among consumers seeking comfort and convenience.

At the heart of the Desa 107624-01 is its powerful heating technology, allowing it to deliver consistent warmth even in the coldest conditions. Its advanced heating elements have been specifically engineered to provide rapid heat distribution throughout the room, ensuring that no corner is left uncomfortably chilly. As a result, homeowners can enjoy a cozy environment without the need for excessive energy consumption.

One of the standout features of the Desa 107624-01 is its programmable thermostat, which allows users to set their desired temperature with precision. This intelligent thermostat not only enhances user comfort but also contributes to energy savings. Users can program the heater to operate at specific times, ensuring that the space is warm when they need it and conserving energy when it is not in use. This commitment to energy efficiency reflects the growing trend towards environmentally conscious heating solutions.

Additionally, the Desa 107624-01 boasts a sleek design that seamlessly integrates into various interior aesthetics. It is available in multiple color options, allowing homeowners to choose a style that complements their decor. The unit's compact size further enhances its versatility, making it suitable for smaller spaces where traditional heating systems may not fit.

Safety is also a top priority with the Desa 107624-01. The heater is equipped with advanced safety features, including an automatic shut-off function that activates in the event of overheating. This gives users peace of mind, knowing that they can enjoy the warmth without compromising safety.

Furthermore, the Honda Innovation technology incorporated into the heater promises quieter operation. This ensures that the heating process does not disrupt daily activities or peaceful evenings, further enhancing user satisfaction.

In conclusion, the Desa 107624-01 combines efficiency, safety, and design into a single unit, making it an ideal choice for today's heating needs. Whether for a cozy family room or a small apartment, it provides reliable warmth while remaining environmentally conscious and stylish. As energy efficiency and modern aesthetics become increasingly important in home heating, the Desa 107624-01 is set to lead the way.
Top Page Image Contents