TDB3108, WF3208 Terreon® 54" Circular | Installation |
Table of Contents |
|
. . . .2 | |
Model TDB3108 Dimensions | . . |
Model WF3208 Dimensions | . . . .6 |
Washfountain | . . |
Installation Information | |
Terreon® Cleaning/Maintenance | . . .20 |
. . .20 | |
Stainless Steel Cleaning/Maintenance | . . .21 |
Soap Dispensing Valve Repair Parts | |
Soap Recommendations and Maintenance | . . .24 |
Sprayhead Troubleshooting/Repair Parts | . . 25 |
Manual Mixing Valve (optional) | . . .26 |
Volume Control Valve | . . .27 |
Vernatherm™ Thermostatic Mixing Valve |
Supplies Required by Installer
•(4) 1/2" lag bolts, screws or other fasteners to anchor washfountain pedestal
•1" hot and cold water supply lines and fittings (refer to
•Reducing fittings and 1/2" nom. copper tubing supply lines for types with supplies from above
•Standard
•2" drain lines and fittings (refer to
•
•Teflon tape or pipe dope
•110 VAC GFI power source for 110/24 VAC UL Class II transformer supplied
•OPTIONAL: Bradley recommends installing an electrical
Pre-Installation Information
Terreon® Material
The Washfountain is constructed of Terreon®, a densified solid surface material composed of polyester resin. Terreon® is resistant to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleaners or
Adaptive Infrared
The sprayhead is controlled by a solenoid valve, allowing the user to activate a flow of water. The Infrared sensor will take a few minutes to adapt to its environment when the unit is powered up.
2 | 4/6/2007 | Bradley Corporation • |