Bradley Smoker TDB3108 installation manual Installation Instructions

Installation TDB3108, WF3208 Terreon® 54" Circular

Installation Instructions continued . . .

D PLACE THE INFRARED MODULE ASSEMBLY ON TOP OF SPRAYHEAD. ROTATE UNTIL INFRARED MODULE LOCKS IN WITH TIE BAR. DROP TWO INFRARED MODULE WIRES DOWN TO VALVE ASSEMBLY.

NOTE! Skip to step E for units without soap.

•FOR UNITS WITH SOAP OPTION, INSTALL THE SPACER, SOAP DISPENSER AND COVER USING THE THIRD TIE ROD (8-5/8" LONG) AND SECOND COUPLING NUT AS SHOWN (SEE FIGURE 7). SECURE WITH ACORN NUT AND SET SCREW.

E SECURE INFRARED MODULE COVER AND TOP COVER WITH ACORN NUT AND SET SCREW.

F	FOR O UNIT: INSTALL 1/2" NOMINAL COPPER TUBING SUPPLY LINES (PASS THEM THROUGH HOLES IN COVER DOWN
	THROUGH SUPPORT COLUMN) AND CONNECT TO STOPS USING SUITABLE FITTINGS.

UNIT WITH “A” DRAIN AND I.R. MODULE

SHOWN, ALSO AVAILABLE WITH “O” DRAIN

TOP COVER

SOAP
DISPENSER				8-5/8"
				TIE ROD
COUPLING						SPACER
NUT
							MODULE
							COVER
			4-1/4"
COUPLING				TIE ROD
NUT
TIE ROD					I.R. MODULE
					ASSEMBLY
(STD.) 21-5/8"					S50-344
(JUV.) 18-1/8"		TIE BAR
SUPPORT TUBE
	SPRAYHEAD
(STD.) S57-005	S05-054
(JUV.) S57-006

Figure 7

Bradley Corporation • 215-1187 Rev. N; EN 06-915B 4/6/2007 13