Alliance Laundry Systems CHM1772C manual Phase Adder, Thermal Overload Protector

Page 48

Installation

2

L1

L2

1L3

SERVICE	CHASIS
GROUND

3

TB1

MACHINES WITH ELECTRIC HEAT	PHM
	PHM
	PHM700N

1Grounding Lug: Connect to proven earth ground

2Customer Input Power Terminals

3Internal Load Distribution - DO NOT connect customer power source or load.

Figure 27

1

SERVICE	CHASIS
GROUND

2

L1

L2

L3

TB1

MACHINES WITHOUT ELECTRIC HEAT	P
MACHINES WITHOUT ELECTRIC HEAT
	PHM721N

1Grounding Lug: Connect to proven earth ground

2Customer Input Power Terminals

Figure 28

Machines can be converted for lower voltage operation and/or 50 Hz operation. Refer to conversion label by serial plate for details.

Phase Adder

IMPORTANT: Do not use a phase adder on any machine.

Thermal Overload Protector

Two speed machines have thermal overload protectors in drive motor windings. For variable-speed machines, the AC drive provides overload protection for the drive motor.

46

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F8208301

Image 48

Contents Washer-Extractors Page Contents Explanation of Safety Messages Important Safety InstructionsSafety Information Safety Decals Operator Safety Do not bypass any safety devices in the machineModel Identification ModelIntroduction Pound 125Delivery Inspection Nameplate LocationCN040GC2OUID01 Introduction Model Number Familiarization GuideReplacement Parts Customer ServiceSpeed Models Specification Weight and Shipping Information Wash Cylinder InformationPower Consumption Estimated Building Heat LoadDrive Train Information Cylinder SpeedsElectrical Heating Optional Number of motors in drive train Drive motor power, hp kW Electrical Heating Specifications and Dimensions Specifications and Dimensions Machine Capacity Dimensions 92 in 252 mm 94 in 202 mm Dimensional Clearances Machine Capacity Dimensional Clearances Dimensions 125Machine Foundation Minimum Depth Methods RequirementMinimum Floor Load Data, 2 Speed Models Specification Floor Load Data, Variable-Speed Models Specification 125Concrete Foundation Installation 20, 30, 40 and 60 ModelsInstallation Models Direct-to-Finished-Floor Installation Anchor Specifications Refer to FigureMachine Anchoring Ft.- lbsElevated Base Frame Installation Completed expansion bolt installation is shown in FigureP035I Mounting Bolt Hole Locations Without Elevated Base Frames ModelsFront of Frame 19 mm 45 mm 660 mm 32 mm 41.5 1054 mm 1219 mm Mounting Bolt Hole Locations With Elevated Base Frames CHM2072N 92 mm 56 mm Drain Connection Drain TroughDrain Information 125 Drain Line Sizing Minimum Drain ID Model Number of MachinesWater Connection Requirements Cabinet Hardmount Water Supply InformationNumber Supply Line Size Machines Hot/ColdElectrical Installation Requirements Input Power Conditioning Input Power Condition Corrective ActionConnection Specifications Input Voltage RequirementsCircuit Breakers and Quick Disconnects GroundingPhase Adder Thermal Overload ProtectorInstallation Electrical Specifications Pound Capacity Models Standard Electric Heat380 440 200 208 Variable-Speed Models 380-415 440-480 200 208-240 10.0 380 50/60 10.0 Steam Requirements Steam Heat Option Only Supply DispensingSteam Supply Information Supply DispensingExternal Supplies Connection of External Liquid Supplies 20 80 Pound OPL ModelsStart Up Basket Rotation

Related manuals

Manual 19 pages 8.07 Kb