Husqvarna P 525D, P 520D manual Seat, Fueling, Lights and power outlet, Safety instructions

Page 14

PRESENTATION

Seat

The seat has a jointed attachment on the front edge and can be tipped forward.

To fold the seat forward, the latch for the seat must be operated.

WARNING! Take care so that hands are not

!trapped or injured by the locking hooks when the seat is folded back.

WARNING! Do not adjust seat settings while

!driving. Risk of unsafe manoeuvring.

The seat can also be adjusted lengthways.

•When making adjustments, the lever under the front edge of the seat is moved up, after which the seat can be moved backwards or forwards to the desired position.

•The seat suspension can be adjusted to driver's weight. The weight is adjusted by turning the knob under the front edge of the seat .

On the sides of the backrest are two knobs:

•Seatback angle is adjusted with the knob on the right side.

•The lumbar support is adjusted with the knob on the left side of seat back .

Fueling

The fuel level in the tank is shown by the gauge on top of the tank.

Fill with diesel fuel. Petrol must not be used under any circumstances. Use fuel with a cetane rating over 45. Max RME mixing 5% in mineral oil-based fuels.

!	WARNING! Diesel is highly ﬂammable.
	Exercise care and refuel outdoors (see
	safety instructions).

The diesel engine injection system is very sensitive and can be damaged by the slightest contamination. Observe the greatest possible fuel cleanliness. Use only clean containers.

Clean the area around the fuel cap. Contamination in the tank can cause operating problems.

If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

Wipe up any spillage. Materials contaminated by fuel must be moved to a safe location.

IMPORTANT!

Do not use the fuel tank as a support area.

Lights and power outlet

The lights are switched on and off using the switch on the instrument panel.

A seat heater or mobile phone charger are examples of articles that can be connected to the power socket.

14 – English

Image 14

Contents 520D 525D EnglishContents Pre-delivery service After the ﬁrst 25 hoursDriving and transport on public roads IntroductionDear Customer TowingGood service KEY to Symbols SymbolsWhat is WHAT? Location of the controlsInsure your Rider Safety InstructionsSafety instructions General useDriving on slopes This is what you doMaintenance Children Transport Presentation Lifting the Cutting Unit Transport Position Adjusting the cutting heightLever for hydraulic lift of attachments Lowering the Unit Mowing PositionSeat Lights and power outletSafety instructions FuelingInstrument panel Bypass valvesRops Roll Over Protective Structure Auxiliary lift systemBefore starting Starting and driving when coldStarting Engine Start the engineRemove the cables in the reverse order Starting the engine with a weak batteryConnecting the jump leads Braking DrivingDriving the Rider Stop the engineCutting tips Other objects which can be thrown out by the bladesStarting Completed Maintenance schedule800 Checking the engine’s cooling air intake CleaningRemoving of the machine hoods Replacement of fuel ﬁlter Adjustment of pump and alternator beltAdjusting the parking brake Change pump and alternator beltCleaning the ﬁlter cover Cleaning the air ﬁlterCleaning the engine and mufﬂer Replacing the air ﬁlterMain fuse Check the safety systemReplacing the light bulbs Checking the tyre pressureFitting the cutting head Check the batteryCutting Unit Components Lift arms move with great force when Pins are loosened. Observe caution to avoidRemoving the cutting unit Trapping your handService position for the cutting unit Placing in the service positionCutting height Cutting height and tilt angle adjustmentRestoring from service position Removing the BioClip plug Replacing the cutting unit beltsChecking the blades Tilt angleAdjustment of PTO belts Change PTO beltsChange coolant Glycol Water Freezing pointLubrication schedule GeneralCutting unit bevel gear AccessoriesPivot wheel bearings Universal drive shaft jointsSteering cylinder Drive shaft front support bearingDrive shaft rear support bearing Joint bearingReplacing the engine oil Changing the oil ﬁlterCheck the hydraulic system oil level Drained directly after stopping the engineDriver seat Knobs for setting the cutting heightLubricate the parking brake wire Lubricating the cablesStarter motor does not turn over the engine Problem Procedure Engine does not startEngine seems to have no power Engine does not run smoothlyUneven mowing Battery does not chargeEngine overheats Electrical System Wiring diagram P 520D Electrical System Electrical System Electrical System Electrical System Electrical System Wiring diagram P525 D Electrical System Electrical System Electrical System Electrical System Electrical System Guard ServiceWinter storage Technical Data Vibration levels see note EC-declaration of conformity Applies to Europe onlySound levels see note 1154837-26 ´z+Vsh¶6¨ ´z+Vsh¶6¨ Original instructions