Husqvarna P 525D, P 520D Safety Instructions, Safety instructions, Insure your Rider, General use

Page 8

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully.

Insure your Rider

•Check the insurance coverage for your new Rider.

•Contact your insurance company.

•You should have fully comprehensive insurance including: third party, fire, damage, theft and liability

General use

•Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them.

WARNING! This machine produces an

!electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.

•Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals.

•Only allow the machine to be used by adults who are familiar with its use.

•Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or drive off.

•Clear the area of objects such as stones, toys, wires, etc. that may become caught in the blades and be thrown out.

•Look out for the ejector and do not direct it towards anyone.

•Stop the engine and prevent it from starting before you clean the cutting unit.

8 – English

•Remember that the driver is responsible for dangers or accidents.

•Never carry passengers. The machine is only intended to be used by one person.

•Always look downwards and backwards before and while reversing. Keep watch for both large and small obstacles.

•Slow before cornering.

•Switch off the blades when you are not mowing.

•Take care when rounding a fixed object, so that the blades do not hit it. Never run the machine over foreign objects.

!

WARNING! This machine can sever hands

and feet as well as throw objects. Failure to

observe the safety instructions can result in

 

serious injuries.

!

WARNING! The inside of the muffler contain

chemicals that may be carcinogenic. Avoid

contact with these elements in the event of a

 

damaged muffler.

!

WARNING! The engine emits carbon

monoxide, which is a colourless, poisonous

gas. Do not use the machine in enclosed

 

spaces.

•Only use the machine in daylight or in other well-lit conditions. Keep the machine at a safe distance from holes or other irregularities in the ground. Pay attention to other possible risks.

•Never use the machine if you are tired, if you have consumed alcohol, or if you are taking other drugs or medication that can affect your vision, judgement or co- ordination.

•Keep an eye on the traffic when working close to a road or when crossing it.

•Never leave the machine unsupervised with the engine running. Always stop the blades, apply the parking brake, stop the engine and remove the keys before leaving the machine.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 520D 525D EnglishContents Pre-delivery service After the first 25 hoursIntroduction Dear CustomerDriving and transport on public roads TowingGood service KEY to Symbols SymbolsWhat is WHAT? Location of the controlsSafety Instructions Safety instructionsInsure your Rider General useDriving on slopes This is what you doMaintenance ChildrenTransport Presentation Adjusting the cutting height Lever for hydraulic lift of attachmentsLifting the Cutting Unit Transport Position Lowering the Unit Mowing PositionLights and power outlet Safety instructionsSeat FuelingInstrument panel Bypass valvesRops Roll Over Protective Structure Auxiliary lift systemStarting and driving when cold Starting EngineBefore starting Start the engineRemove the cables in the reverse order Starting the engine with a weak batteryConnecting the jump leads Driving Driving the RiderBraking Stop the engineCutting tips Other objects which can be thrown out by the bladesStarting Completed Maintenance schedule800 Checking the engine’s cooling air intake CleaningRemoving of the machine hoods Adjustment of pump and alternator belt Adjusting the parking brakeReplacement of fuel filter Change pump and alternator beltCleaning the air filter Cleaning the engine and mufflerCleaning the filter cover Replacing the air filterCheck the safety system Replacing the light bulbsMain fuse Checking the tyre pressureFitting the cutting head Check the batteryCutting Unit Components Pins are loosened. Observe caution to avoid Removing the cutting unitLift arms move with great force when Trapping your handService position for the cutting unit Placing in the service positionCutting height Cutting height and tilt angle adjustmentRestoring from service position Replacing the cutting unit belts Checking the bladesRemoving the BioClip plug Tilt angleAdjustment of PTO belts Change PTO beltsChange coolant Glycol Water Freezing pointLubrication schedule GeneralAccessories Pivot wheel bearingsCutting unit bevel gear Universal drive shaft jointsDrive shaft front support bearing Drive shaft rear support bearingSteering cylinder Joint bearingChanging the oil filter Check the hydraulic system oil levelReplacing the engine oil Drained directly after stopping the engineKnobs for setting the cutting height Lubricate the parking brake wireDriver seat Lubricating the cablesProblem Procedure Engine does not start Engine seems to have no powerStarter motor does not turn over the engine Engine does not run smoothlyUneven mowing Battery does not chargeEngine overheats Electrical System Wiring diagram P 520D Electrical System Electrical System Electrical System Electrical System Electrical System Wiring diagram P525 D Electrical System Electrical System Electrical System Electrical System Electrical System Guard ServiceWinter storage Technical Data Vibration levels see note EC-declaration of conformity Applies to Europe onlySound levels see note 1154837-26 ´z+Vsh¶6¨ ´z+Vsh¶6¨ Original instructions
Top Page Image Contents