Husqvarna P 525D, P 520D manual Technical Data

TECHNICAL DATA

	P 520D	P 525D
Dimensions
Length without cutting unit, cm/in	208 / 81,9	211 / 83.07
Width without cutting unit, cm/in	111 / 44.1	114 / 44.88
Height, cm/ft	129 / 50,8	133 / 52.4
Unladen weight excluding cutting unit, kg/lb	625 / 1378	665 / 1466
Wheelbase, cm/in	106 / 41.7	106 / 41.7
Tyre dimensions	18 x 8,5 x 8	20x10x10
Air pressure, rear - front, kPa / bar / PSI	150/1,5/22	150/1,5/22
Engine
Brand / Model	Kubota D902	Kubota D1105
Nominal engine output, kW (see note 1)	14,5	17,8
Displacement, cm3/cu.in	898 / 54.8	1123 / 68.5
Fuel, minimum octane grade lead-free	min 45 cetane 2.0-4.5 cSt @ 40°C	min 45 cetane 2.0-4.5 cSt @ 40°C
	0.835-0.855 kg/l sulphur<0.2w%	0.835-0.855 kg/l sulphur<0.2w%
Tank volume, litres/USqt	25 / 6.6	25 / 6.6
Oil, API class CD or better	SAE 10W/40	SAE 10W/40
Oil volume incl. filter	3,3/3,5	3,3/3,5
Oil volume excl. filter, litres/USqt	3,0/3,2	3,0/3,2
Max.motor speed, r/min	3000	3000
Starting	Electric starter	Electric starter
Electrical system
Type	12 V, negative earthed	12 V, negative earthed
Battery	12 V, 62 Ah	12 V, 62 Ah
Main fuse, A	125	125
Supply fuse circuit board, A	50	50
Bulbs, halogen	2x12V 20W	2x12V 20W
Cooling system
Cooling system capacity, l/USqt	3,7/3,9	3,7/3,9
Antifreeze	≥ 50% glycol	≥ 50% glycol
Hydraulic System
Max. working pressure, bar / psi	120 / 1740	120 / 1740
Hydraulic tank capacity, l/USqt	8/8,5	8/8,5
Hydraulic system capacity, l/USqt	13/13,7	13/13,7
Transmission
Brand	Kanzaki KTM 23	Kanzaki KTM 23
Oil, class API SM, ACEA A3/B4	SAE 10W/50 Synthetic	SAE 10W/50 Synthetic
Oil capacity gearbox front, l/USgal	0,9 / 0.24	0,9 / 0.24
Oil capacity gearbox rear, I/USgal	0,9 / 0.24	0,9 / 0.24
Max. hydraulic pressure, bar/psi	275/3989	275/3989
Drive
Forward speed, km/h.	0-15	0-18,5
Reverse speed, km/h	0-12	0-14

Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.

54 – English