Husqvarna 265 ACX manual Connecting the boundary wire

Page 30

3.INSTALLATION

3.5Connecting the boundary wire

Connect the boundary wire to the charging station:

1.Lift up the cover on the charging station:

• Grip under the edge of the cover with both hands and pull straight out towards the sides.

• Now lift the cover straight up.

2.Slide in the ends of the boundary wire in the

lowermost holes on the charging station and catch them in the uppermost holes.

The right hand wire end should be inserted in the right hand hole, and the left hand wire end in the left hand hole.

IMPORTANT INFORMATION

The boundary wire must not be crossed when connecting to the charging station. Therefore the right hand wire end must be connected to the right hand connector on the charging station and vice versa.

30 - English

Image 30

Contents Husqvarna Automower 265 ACX OPERATOR’S Manual Page Table of Contents Table of Contents Introduction and safety IntroductionSymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Function of Automower CapacityMowing technique Working method Movement pattern Search method Search method 2 Follow boundary wireSearch method 3 Follow guide wire Search method 1 IrregularMore than one Automower in a garden One Automower in several gardensGPS communication unit Installation Carry out the installation in the following stepsPreparations Installation of the charging station Best charging station locationImportant Information Installation Installation and connecting the charging station Do not tread or walk on the charging station plateCharging the battery Automower cannot be used before the installation is completeInstallation of the boundary wire Best position for the boundary wireBoundaries for the working area Boundaries within the working area Secondary areasPassages when mowing Passages when searching for the charging stationSlopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire Installation Checking the installation Linking Automower to the charging stationInstallation of the guide wire Need of a guide wirePlacement and connection of the guide wire Maximum 135º 90º Activate the GPS anti-theft Protection area Charging a discharged battery UseUsing the timer Using GPS-communicationSMS feature Description Commands Remarks CommandsGPS anti-theft protection Starting Automower Restart Switching off AutomowerStopping Automower Restart within 20 secondsAdjusting the cutting height Control panel Shortcuts Main switch NumbersBrowse between menus Menu functionsMain menu Number seriesAutomower Main menu Commands TimerStart time 1 Stop time 1 Start time 2 Stop time 2 Reset all timersYES Mon Tue Wed Thu Fri Sat Sun Run allStart angle 1 InstallationReversing distance End angle 1Passage where the charging station cannot be To follow the boundary wire or a guide wire awayGardens where the front and back are joined by a When this function is activated Automower willProportion DirectionDistance Follow loopCorridor width Test Test OUT Open SettingsDrive past wire NormalPIN code Time lock4-1-2Alarm4-1-3 GPSTime format Set timeSet date Date formatProposed installation and settings Garden exampleExit angles Exit angles 250Corridor width Guide 1 Exit angles 70 Maintenance BatteryAutomower ServiceWinter storage Charging stationUnderframe and blade disc CleaningAfter winter storage ChassisReplacing the blades Transport and movingBody Trouble shooting Fault messagesTrouble Shooting Trouble Shooting Fault symptom Technical data Data Automower 265 ACXData GPS communication unit Environmental information Environmental InformationEU declaration of conformity EU Declaration of Conformity only applies to EuropePage Page Original Instructions

Related manuals

Manual 2 pages 27.84 Kb