Husqvarna 265 ACX manual Test OUT

Page 56

6. MENU FUNCTIONS

When the function is selected the mower will immediately follow the boundary wire, guide 1 or guide 2, depending on which one it finds first, in to the charging station. If there is a passage and the mower can not run through it, the Corridor width value is set too high. When Test IN is activated, the mower runs at the greatest distance from the wire that the selected corridor width permits.

The adjacent picture shows how Automower® negotiates a passage when a value of 8 is set for the Corridor width, but not when a value of 10 is set.

8

10

IMPORTANT INFORMATION

When Test IN (3-2-4)is used, the house icon on the display will come on and the mower will remain in the charging station. Press the Home button to return to operations.

•Test OUT (3-2-5)

The Test OUT (3-2-5)function is used to try different charge exit settings and to find out how far it is from the charging station to a remote area.

To test the settings for Follow loop out (3-2-1):

•Set Proportion to 100 % for the most remote area to be tested and 0 % for the other areas. Place Automower® in the charging station and select Test OUT (3-2-5). The mower will now leave the charging station directly according to the stated direction and start mowing after the stated distance. Reset the Proportion values when testing is finished.

To find out the distance from the charging station to a remote area:

•State a distance that easily exceeds the true distance. The maximum distance that can be stated is 500 metres. Set Proportion to 100 % for the areas where the distance is to be measured and 0 % for the other areas. Place Automower® in the charging station and select Test OUT (3-2-5). The mower will now leave the charging station directly according to the stated direction. The distance will be shown on the display, stated in metres, as the mower runs. Stop the mower after the required distance and read the distance. Enter the number of metres shown in Distance for the area in question. Reset the Proportion values when testing is finished.

Follow loop out

Follow loop in

Corridor width

Test IN

Test OUT

3-2-4

56 - English

Image 56

Contents Husqvarna Automower 265 ACX OPERATOR’S Manual Page Table of Contents Table of Contents Introduction and safety IntroductionSymbols on Automower Important Information Xxxxxx xxxxx xxxx xxxx xxxxx Symbols in the Operator’s ManualXxxxxx xxxxx xxxx xxxx xxxxx Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Mowing technique Function of AutomowerCapacity Working method Movement pattern Search method 2 Follow boundary wire Search method 3 Follow guide wireSearch method Search method 1 IrregularGPS communication unit More than one Automower in a gardenOne Automower in several gardens Preparations InstallationCarry out the installation in the following steps Installation of the charging station Best charging station locationImportant Information Installation Installation and connecting the charging station Do not tread or walk on the charging station plateCharging the battery Automower cannot be used before the installation is completeInstallation of the boundary wire Best position for the boundary wireBoundaries for the working area Boundaries within the working area Secondary areasPassages when mowing Passages when searching for the charging stationSlopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire Installation Checking the installation Linking Automower to the charging stationInstallation of the guide wire Need of a guide wirePlacement and connection of the guide wire Maximum 135º 90º Activate the GPS anti-theft Protection area Charging a discharged battery UseSMS feature Using the timerUsing GPS-communication GPS anti-theft protection Description CommandsRemarks Commands Starting Automower Switching off Automower Stopping AutomowerRestart Restart within 20 secondsAdjusting the cutting height Control panel Shortcuts Main switch NumbersMenu functions Main menuBrowse between menus Number seriesAutomower Main menu Commands TimerReset all timers YESStart time 1 Stop time 1 Start time 2 Stop time 2 Mon Tue Wed Thu Fri Sat Sun Run allInstallation Reversing distanceStart angle 1 End angle 1To follow the boundary wire or a guide wire away Gardens where the front and back are joined by aPassage where the charging station cannot be When this function is activated Automower willDirection DistanceProportion Follow loopCorridor width Test Test OUT Settings Drive past wireOpen NormalPIN code Time lock4-1-2Alarm4-1-3 GPSSet time Set dateTime format Date formatProposed installation and settings Garden exampleExit angles Exit angles 250Corridor width Guide 1 Exit angles 70 Maintenance BatteryService Winter storageAutomower Charging stationCleaning After winter storageUnderframe and blade disc ChassisBody Replacing the bladesTransport and moving Trouble shooting Fault messagesTrouble Shooting Trouble Shooting Fault symptom Data GPS communication unit Technical dataData Automower 265 ACX Environmental information Environmental InformationEU declaration of conformity EU Declaration of Conformity only applies to EuropePage Page Original Instructions

Related manuals

Manual 2 pages 27.84 Kb