1.INTRODUCTION AND SAFETY
1.4Safety instructions
Use
•This robotic lawn mower is designed to mow grass in open and level ground areas. It may only be used with the equipment recommended by the manufacturer. All other types of use are incorrect. The manufacturer’s instructions with regard to operation, maintenance and repair must be followed precisely.
•The robotic lawn mower may only be operated, maintained, and repaired by persons that are fully conversant with its special characteristics and safety regulations. Please read the Operator’s Manual carefully and make sure you understand the instructions before using the robotic lawn mower.
•It is not permitted to modify the original design of Automower®. All modifications are made at your own risk.
•Check that there are no stones, branches, tools, toys or other objects on the lawn that can
damage the blades and cause the mower to stop.
• Start Automower® according to the instructions.
When the main switch is in the ON position; make sure you keep your hands and feet away from the rotating blades. Never put your hands and feet under the mower.
•Never lift up Automower® or carry it around when the main switch is in the ON position.
•Do not let persons who do not know how Automower® works and behaves use the mower.
• Never use Automower® if persons, especially children, or pets, are in the immediate vicinity.
•Do not put anything on top of Automower® or its charging station.
•Do not allow Automower® to be used with a defective blade disc or body. Neither should it be used with defective blades, screws, nuts or cables.
•Do not use Automower® if the main switch does not work.
•Always switch off Automower® using the main switch when you do not intend to use the mower. Automower® can only start when the main switch is moved to the ON position and the correct PIN code has been entered.
•Automower® must never be used at the same time as a sprinkler. In this case use the timer function, see 6.4 Timer (2) on page 49, so the mower and sprinkler never run simultaneously.
8 - English