Husqvarna 265 ACX manual Installation, Reversing distance, Start angle 1, End angle 1

6. MENU FUNCTIONS

6.5 Installation (3)

From this option in the main menu you access the driving settings.

•Exit angles (3-1)

to set how far Automower® should reverse out of the charging station before it turns and in what direction the mower should leave the charging station.

•Follow loop (3-2)

to guide the mower to easily reach a remote area of the garden, to make it easier to find the charging station and to determine at what distance the mower shall follow the loop.

•Installation shape (3-3)

to tell Automower® which type of garden you have.

•Advanced (3-4)

to check that the loop is intact or exactly where in the lawn the wire is buried and to adjust the distance over the boundary wire that Automower® shall run.

For examples of garden settings, see 7. Garden example on page 61.

Exit angles (3-1)

Normally Automower® leaves the charging station in a direction within the exit sector 90°-270°, where 90° is called the Start angle and 270° is called the End angle. By setting the start and end angles, you can set the direction in which Automower® is to leave the charging station.

Commands

Timer

Installation

Settings

3

Exit angles

Follow loop

Installation shape

Advanced

3-

•Reversing distance (3-1-1)

Specify the number of centimetres you want Automower® to reverse before it turns to drive out of the charging station.

The default reversing distance is 60 cm.

•Start angle 1 (3-1-2)

Specify in degrees where you want the sector/sector 1 to start.

•End angle 1 (3-1-3)

Specify in degrees where you want the sector/sector 1 to end.

Exit angles

Follow loop

Installation shape

Advanced

3-1

Reversing dist.

Start angle 1

End angle 1

3-1-

English - 51