Husqvarna 265 ACX manual Installation and connecting the charging station

Page 21

3. INSTALLATION

Installation and connecting the charging station

1.Position the charging station in a suitable spot.

2.Attach the charging station to the ground using

the supplied screws.

3. Ensure the screws are secured all the way down in the countersink.

IMPORTANT INFORMATION

It is not permitted to make new holes in the plate. Only the existing holes may be used to secure the plate to the ground.

4.Connect the low voltage cable to the charging station.

Only use original cable and transformer.

5.Connect the low voltage cable to the

transformer.

The connectors may be slightly difficult to connect, as they are moisture-proof.

6.Connect the transformer’s power cord to a 230V wall socket. It is preferable to use an earth-fault breaker as recommended.

IMPORTANT INFORMATION

Do not tread or walk on the charging station plate.

English - 21

Image 21

Contents Husqvarna Automower 265 ACX OPERATOR’S Manual Page Table of Contents Table of Contents Introduction Introduction and safetySymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Use Safety instructionsTransport MaintenancePresentation Automower, what’s what? Function of Automower CapacityMowing technique Working method Movement pattern Search method 3 Follow guide wire Search method 2 Follow boundary wireSearch method Search method 1 IrregularMore than one Automower in a garden One Automower in several gardensGPS communication unit Installation Carry out the installation in the following stepsPreparations Best charging station location Installation of the charging stationImportant Information Installation Do not tread or walk on the charging station plate Installation and connecting the charging stationAutomower cannot be used before the installation is complete Charging the batteryBest position for the boundary wire Installation of the boundary wireBoundaries for the working area Secondary areas Boundaries within the working areaPassages when searching for the charging station Passages when mowingSlopes Laying out the boundary wire Joining the boundary wire Laying the boundary wire in towards the charging stationConnecting the boundary wire Installation Linking Automower to the charging station Checking the installationNeed of a guide wire Installation of the guide wirePlacement and connection of the guide wire Maximum 135º 90º Activate the GPS anti-theft Protection area Use Charging a discharged batteryUsing the timer Using GPS-communicationSMS feature Description Commands Remarks CommandsGPS anti-theft protection Starting Automower Stopping Automower Switching off AutomowerRestart Restart within 20 secondsAdjusting the cutting height Control panel Shortcuts Numbers Main switchMain menu Menu functionsBrowse between menus Number seriesAutomower Main menu Timer CommandsYES Reset all timersStart time 1 Stop time 1 Start time 2 Stop time 2 Mon Tue Wed Thu Fri Sat Sun Run allReversing distance InstallationStart angle 1 End angle 1Gardens where the front and back are joined by a To follow the boundary wire or a guide wire awayPassage where the charging station cannot be When this function is activated Automower willDistance DirectionProportion Follow loopCorridor width Test Test OUT Drive past wire SettingsOpen NormalTime lock4-1-2 PIN codeGPS Alarm4-1-3Set date Set timeTime format Date formatGarden example Proposed installation and settingsExit angles 250 Exit anglesCorridor width Guide 1 Exit angles 70 Battery MaintenanceWinter storage ServiceAutomower Charging stationAfter winter storage CleaningUnderframe and blade disc ChassisReplacing the blades Transport and movingBody Fault messages Trouble shootingTrouble Shooting Trouble Shooting Fault symptom Technical data Data Automower 265 ACXData GPS communication unit Environmental Information Environmental informationEU Declaration of Conformity only applies to Europe EU declaration of conformityPage Page Original Instructions

Related manuals

Manual 2 pages 27.84 Kb