Husqvarna 265 ACX manual Starting Automower

4. USE

Remarks	Commands	Remarks
Enter the administrator’s phone	Spn1 +nnnnnnnnnnn	Required for operation, +nnnnnnnnn
number		= phone number incl. country code
Set phone number of user 2	Spn2 +nnnnnnnnnnn	Optional, not required, +nnnnnnnnn =
		phone number incl. country code
Set phone number of user 3	Spn3 +nnnnnnnnnnn	Optional, not required, +nnnnnnnnn =
		phone number incl. country code
Set phone number of user 4	Spn4 +nnnnnnnnnnn	Optional, not required, +nnnnnnnnn =
		phone number incl. country code
Set phone number of user 5	Spn5 +nnnnnnnnnnn	Optional, not required, +nnnnnnnnn =
		phone number incl. country code
Remove a phone number	Dpnx	x = number for which users from 2-5
		will be removed
Read position and status of the	Rcg
central point
Read position of the mower	Rpos

***1=English, 2=Italian, 3=German, 4=French, 5=Spanish, 6=Swedish, 7=Portuguese, 8=Dutch, 9=Danish, 10=Norwegian, 11=Finnish, 12=Polish, 13=Czech, 14=Slovenian

4.4 Starting Automower®

1.Press the STOP button to open the control panel cover.

2.Set the main switch to the ON position.

3.Enter the PIN code.

The default setting for the theft prevention function Time lock(4-1-2)on Automower® is active. The function requires the PIN code to be stated each time the main switch is moved to the ON position when this is not done correctly the mower will stop mowing after the set number of days and will not start again until the correct PIN code has been entered. The function can be deactivated or changed as required. For more information about Time lock(4-1-2), see page 58.

4.Close the cover.

The message Starting is shown on the display.

5 beeps are heard over 2 seconds when the blade disc starts.

ON

OFF

English - 41