Samsung SCC-C6403P Installing the Camera

5)CEILING MOUNT ADAPTOR (SADT-100CM)

This adaptor is used for installing the indoor housing or the outdoor housing for the SmartDome Camera to a concrete ceiling.

6)POLE MOUNT ADAPTOR (SADT-100PM)

This adaptor is used for installing the WALL MOUNT ADAPTOR (SADT-100WM) to a pole that is over 8 cm (2.76 in.) in diameter.

Installing the Camera

1. [Figure 1] Install the structure on the ceiling.

(Refer to Installation reference for the Length of the structure)

* Built in by the builder of the structure

E

[Figure 1]

2.Make a hole in the ceiling where the camera will be installed. (The hole should be about ø185)

3.[Figure 2] Assemble the BRKT-ANCHOR on the ceiling and screw the 4 bolts in.

[Figure 2]

4.[Figure 3,4] Connect the various cables to the CAMERA ADAPTER. (See page 2-4)

[Figure 3]

[Figure 4]

2-7 2-8