Samsung SCC-C6403P 4. ZONE SET, POSITION SET, PRESET ID, VIDEO SET, PRESET SPEED, IMAGE HOLD, ZONE DIR SET

POSITION SET

From "POSITION SET..." press [ENTER] to get into the PAN/TILT, FOCUS/ZOOM SET screen

to set the PAN/TILT location and FOCUS/ZOOM condition then press [ENTER] to return to a higher menu.

PRESET ID

This is the ID set up function for each PRESET.

It can be set up to 12 characters using the left, right, up, and down keys. The ID location can be set in the submenu of "LOCATION..."

VIDEO SET

This is the screen setting function for each PRESET.

Refer to the explanation under "VIDEO SET menu".

PRESET SPEED

This function sets up the speed of PAN or TILT by 8 steps from 1(SLOW) to 8(FAST).

-PRESET SPEED 1 : Maximum PAN moving speed of 240°/sec

-PRESET SPEED 8 : Maximum PAN moving speed of 400°/sec

DWELL TIME

This is a function setting for the DWELL TIME of the PRESET location in "SCAN" motion. It can set DWELL TIME From 1 ~ 60 Sec.

IMAGE HOLD

Pauses the image when PRESET is in movement, If you set the IMAGE HOLD menu to ON, the screen will be paused until PRESET finishes moving.

EXIT

"QUIT" : Does not save the selected information and returns to a higher menu.

"SAVE" : Do saves the selected information and returns to a higher menu.

"DEL" : Deletes the selected information and restores the DEFAULT. Then returns to a higher menu.

4. ZONE SET

The ZONE SET menu includes the setup of ZONE DIRECTION, and

ZONE AREA.

** MAIN MENU **				(ZONE SET)
	CAMERA SET...
	VIDEO SET...
			➜	ZONE DIR SET	OFF
	PRESET...
				ZONE AREA SET	OFF	E
	ZONE SET	...
			Press
	AUTO SET...
	ALARM SET...		[Enter]
	OTHER SET...			EXIT	QUIT
	SYSTEM INFO...

ZONE DIR SET

Press the [Enter] key in the “ZONE DIR SET ON…” mode to enter the SET NORTH screen. MAP. Move PAN to set the SET NORTH position and press [ENTER]. Based on the North position,the direction of N(North), NE(North-East), E(East), SE(South-East), S(South), SW(South-West), W(West), NW(North-West) is displayed whenever you move PAN.

(ZONE SET)
			SET NORTH
ZONE DIR SET	ON...	➜
ZONE AREA SET	OFF
		Press		N
		[Enter]
EXIT	QUIT

3-18 3-19