5. [Figure 5] Match the | 6. Pull the safety wire from the case |
body, and assembly it to the camera | |
ADAPTER and use 4screws | holder. |
(PH M4 x 8) to assemble them. |
|
Chapter 3 Setup Menu Overview
[Figure 5]
[Figure 6]
In this chapter, we will look over the Setup Menu of the
Setup Menu, and then we'll look at the functions of each menu.
[Figure 7]
7.[Figure 7] Match the 3 holes on the back of the CAMERA and the
CONNECTOR and turn it left about 15 degrees.
(Check the sound of LOCKING and that the
* Use the screws (BH M3 x L8) to connect the CAMERA and the ADAPTER so they don't move.
8. [Figure 8] Assemble the
[Figure 8]