WHITE BAL
Lights are generally denoted as color temperatures and expressed in Kelvin (K) units.
The general light color temperatures are shown below.
10000K | Blue sky |
9000K | Rainy |
| |
8000K |
|
7000K | Cloudy |
| |
6000K | Partly Cloudy |
5000K | Sunny |
| |
4000K | Fluorescent lamp |
3000K | Halogen lamp |
2000K |
|
| Tungsten lamp |
1000K | Candlelight |
|
You can select one of four modes for white balance adjustment as follows:
-
ATW1 : 2500K ~ 9300K(✻1)
ATW2 : 2000K ~ 10000K(Mode recommended for sodium lighting)(✻2)
✻1. If the color temperature is out of this range in ATW1 mode, proper white balance may not be obtained. In that case, select ATW2 mode.
✻2. In ATW2 mode, if one color is dominated in the shooted area, the
color can be displayed differently. |
| |
E | ||
Therefore, select the mode which is appropriate for the environment. | ||
|
-
-MANU : If WHITE BAL menu is set to MANU mode, the user can set the white Balance considering the current illumination. Select MANU item and press [ENTER], the sub screen where you can select Manual White Balance will be shown. Use the left/right keys to select 3200K, 5600K or OFF(USER) mode in the PRESET menu.
-3200K : Set color temperature to 3200K
-5600K : Set color temperature to 5600K
-USER : Choose out a proper value from the RED and BLUE graph for color and temperature setup.
| (VIDEO SET) |
|
| (AWB/MANU) |
| ||
|
|
|
| ||||
| IRIS | ALC... | ➜ |
|
|
| |
| SHUTTER | OFF |
|
|
| ||
| AGC | LOW | Press |
|
|
| |
| WHITE BAL |
| MANU... |
|
|
| |
| DIS | ON | [Enter] |
|
|
| |
PRESET |
| 3200K | |||||
| FOCUS MODE | ONEAF |
|
|
|
| |
| SPECIAL | ... |
|
|
|
| |
| EXIT | QUIT |
| RET |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIS
The DIS(Digital Image Stabilization) function compensates the camera screen shaking incurred from vibration.
❈It is recommended to deactivate the DIS function in the no vibration environment.
❈From VIDEO SET, if you set SHUTTER to between AUTO X2... and AUTO X128... DIS will be displayed as
You can’t adjust the settings manually.