3M 39800 - page 49

3M-Matic 800rf Case Sealer Installation

Installing Air On/Off Valve/Regulator/Filter

13. Locate the Air On/Off Valve/Regulator/Filter and

bracket.

14. Rotate the bracket 180°.

a. Remove the lower socket-head screw (4

mm) and loosen the upper screw, but do not

remove it. Refer to Figure 2-26.

b. Punch a hole in the label. Then rotate the

bracket 180°. The label will be upside-down

(a replacement label is available and may

be ordered as replacement parts are or-

dered).

c. Secure the Air On/Off Valve/Regulator/

Filter to the bracket by installing the lower

socket-head screw and tightening the upper

screw. Refer to Figure 2-27.

15. Mount the bracket with the Air On/Off Valve/

Regulator/Filter to the left bracket that supports

the Pneumatic Control Panel.

Figure 2-27. Air On/Off Valve/Regulator/Filter

and Bracket Rotated 180°

Figure 2-26. Air On/Off Valve/Regulator/Filter

and Bracket