3.
3M-Matic 800rf Case Sealer Adjustments
Copyright 1999, 3M IPC. All rights reserved. 3-1
3. Adjustments

3-1. Case Sealer Bed Height

Specification
Adjust the case sealer bed height so that it is the same
height as the conveyor line to which it is attached.
Adjustment
1. Raise and support the case sealer frame to allow
adequate leg adjustment.
1. Using a 6 mm hex key wrench, loosen, but do not
remove, two M8 x 16 mm socket-head cap screws
in one leg. Refer to Figure 3-1.
Figure 3-1. Bed Height Adjustment
3. Using the height label as a guide, adjust the leg
length to the desired conveyor bed height.
Retighten the two screws to secure the leg.
4. Adjust the five remaining legs in the same way.