24 3M™ MicroTouch™ Software MT 7 User Guide
3M Touch Systems, Inc. Proprietary Information – 25695M
Draw Test Note: You must be in Draw mode for this to work properly.
The Draw program lets you test the operation of the sensor and pen by checking the
accuracy and speed with which the system responds to your touch. To draw, simply
touch the sensor and drag your finger or pen.
The following options will help you use the draw program more effectively:
• Press B (blank) to clear the screen and display a blank drawing canvas.
• Press G (grid) to clear the screen and display a grid that you can use as a drawing
guide (default setting).
• Press L (line) to draw solid lines on the screen (default setting).
• Press D (dots) to draw dotted lines on the screen, where each dot represents a point
reported by the sensor.
• Press the Space Bar to clear the display.
Software
The Reset Software option is useful if you have reconfigured the MT 7 software and
need to get back to a working state. This option will restore supplier factory
configuration settings. If none exist, it will reset to 3M Touch System defaults.
Controller
The Restore Controller option is useful if you have reconfigured the controller and need
to get back to a working state. Pressing this button restores 3M Touch System factory-set
system defaults.