3M Touch Systems, Inc. Proprietary Information – 25695M

3M™ MicroTouch™ Software MT 7 User Guide

41

CHAPTER 5

MT 7 for Linux® Overview

MT 7 for Linux® provides unified driver support for the Linux® operating system for kernel 2.4 and 2.6. This product includes a user-space sensor driver, an X input module, and a calibration tool.

System Requirements

Hardware Prerequisites

The MT 7 for Linux® software runs on most computers that run the Linux® kernel 2.4 and 2.6 operating system. The computer's processor must be compatible with the Intel x86 series of processors.

One or more of the following 3M™ MicroTouch™ touch

controllers:

∙ EX USB, HID, and Serial controllers

 

∙ DX Dual mode (USB and Serial) controllers

 

∙ PX Dual mode (USB and Serial) controllers

 

∙ RX USB and Serial controllers

 

∙ SX Serial pen controllers

 

Depending on the sensor, either a serial port or a USB port is required.

Software Prerequisites

The MT 7 for Linux® software requires a Linux® oper ating system, kernel version 2.4 and 2.6. There are separate versions for 32-bit and 64-bit distributions of Linux operating systems.

Shared memory support is required.

The calibration tool requires an X11-compliant X Windows® server.

The control panel requires a Java® runtime environm ent (JRE) compatible with Oracle® Java®.

Install requires Perl©

Page 41
Image 41
3M MT7 manual MT 7 for Linux Overview, System Requirements, Hardware Prerequisites, Software Prerequisites