3M MT7 MT 7 Components

40 3M™ MicroTouch™ Software MT 7 User Guide
3M Touch Systems, Inc. Proprietary Information – 25695M
Use this Browser to select the MT 7 components for your target image. The only
required component is the MT 7 Touch driver. In the Component Browser, look under
"Hardware:Devices:Mice and other pointing devices". Select the 3M Touch Systems
MT7 Touch driver.
Whether you are using a serial or USB controller, the MT7 touch driver requires USB
support. You must include the XPe USB support component in your target device.
MT 7 Components
MT7 has several additional components, found in the Component Browser under
"Software:Application:OEM,” that you may select according to the needs of your target
system.
The "MT7 Control Panel" component allows the end user to calibrate their sensor,
configure, and modify some touch behavior.
The "MT7 Calibration Tool" component allows the user to calibrate their sensor.
Note that you must select one or more of the following controller support components to
enable the previous tools.