ABL electronic Scamax 2600, Scamax 5000 5.3.2How to Set and to Trigger Counters, be reached, Field Width, Increment Value, The Sequential ID will be incremented always as expected

Scanner Options Scamax 2600 / 5000 DpuScan

5.3.2How to Set and to Trigger Counters

	Illustration 8 – Counter Modes
Field Width	This define how many digits the counter should have. If it is set to, for
	example, 3 digits, the counter will count from 0 to 999. After that it resets
	to 0 again.
	Be aware that the reset and trigger value must be "in range”. In this
	example, use a value before counter 1000, because 1000 will never
	be reached.
	We recommend the use of higher numbered digits for a lower level, and a
	lower number of digits for a higher level. For example, if there are many
	pages in just a few chapters, 6 digits should be chosen for the Page
	Counter, and 2 digits for the Chapter Counter.
	If a counter – including the automatic Page Counter A - has a field
	width of zero, this counter will not be incremented and interpreted.
	The Sequential ID will be incremented always as expected.

Increment Value (by a As a reaction to an event, the corresponding counter will be incremented

certain value)	by the entered value. For example, the chapter counter can be
	incremented while the page counter is at reset value.

Page 25 of 42