DpuScan

Scamax 2600 / 5000

Scanner Options

If the counters are correspondingly set and enabled in the module Patchcode-Controlled Index, they will be set and incremented as per the defined rules. So, for example, a document with the Patchcode ”Patch I” can indicate a new chapter. The chapter counter value increases incrementally by one and the sheet counter is reset to zero.

The Index Flags

There are two flags that can be set for a sheet:

The latched flag remains set until it is reset, manually or via a defined Rule.

It can, for example, indicate that certain sheets are addenda to a certain form. The momentary flag is valid only for the next sheet; it is then automatically reset.

You can use it, for example, to mark only the first document ("main document") of a new batch.

Document Level

The module uses the document level for Patchcode-Controlled Index, for example, to control document separation.

Sequential ID

The scanner assigns a sequential number to the scanned sheets. This number usually cannot be modified by a rule from the Patchcode-Controlled Index.

Exception: The sheet is "voided” or "not counted”.

Page 14 of 42