138
4.6.1.1 Unicast address configuration
Click MAC address table configuration, MAC address table configuration, Unicast
address configuration. Users can add and delete MAC address. See the equivalent CLI
command at 4.2.2:
& MAC address – Specify MAC address
& VID – Vlan number of the MAC address
& Configuration type – static; blackhole
& Port list – Port of the MAC address
& Address aging-time – MAC address aging-time
& Operation type – Add MAC address; delete MAC address
For example: Set MAC address to 00-11-11-11-11-11; Select VID to 1; select
Configuration type to static; select Port list to Ethernet1/1; set Address aging-time to
400 seconds; select Operation type to add mac address, and then click Add. This
configuration is to add static MAC address 00-11-11-11-11-11 to interface Ethernet 1/1
with VID of 1.
4.6.1.2 Remove static MAC address
Click MAC address table configuration, MAC address table configuration, Remove
static MAC address. Users can delete MAC address. See the equivalent CLI command at
4.2.2:
& Delete by VID – Specify VID to delete static MAC address. Check “Delete”
box to delete MAC address according to VID.
& Delete by MAC – Specify MAC address. Check “Delete” box to delete
specified MAC address.
& Delete by port – Specify port to delete MAC address. Check “Delete” box to
delete MAC address according to port.
& Port status – Static; dynamic; discard. Check “Delete” box to delete MAC
address according to port MAC status.