323
queue mode wrr
Function: Queue mode strict configure the queue out. Configure the queue to the output
queue queue mode wrr restores wrr queue out
Default: non-queue mode.
Command mode: Interface Mode
Usage Guide: When queue queue out mode is used, packets are no longer sent with
WRR weighted algorithm, but send packets queue after queue.
Example: Set the queue out mode to queue.
Switch(Config-Ethernet1/1)# queue mode strict
13.1.2.2.16 wrr-queue cos-map
Command: wrr-queue cos-map <queue-id> <cos1 ... cos8>
no wrr-queue cos-map
Function: Set the CoS value mapping to the specified queue out; the “no wrr-queue
cos-map” command restores the default setting.
Parameter: <queue-id> is the ID of queue out, ranging from 1 to 8; <cos1 ... cos8> are
CoS values mapping to the queue out, ranging from 0 – 7, up to 8 values are
supported.
Default:
Default CoS-to-Egress-Queue Map when QoS is Enabled
CoS Value 0 1 2 3 4 5 6 7
Queue Selected 1 2 3 4 5 6 7 8
Command mode: Global Mode
Usage Guide:
Example: Map packets with CoS value 2 and 3 to egress queue 1.
Switch(Config)#wrr-queue cos-map 1 2 3
13.1.2.2.17 mls qos map
Command: mls qos map {cos-dscp <dscp1...dscp8> | dscp-cos <dscp-list> to
<cos> | dscp-mutation <dscp-mutation-name> <in-dscp> to <out-dscp>
|ip-prec-dscp <dscp1...dscp8> | policed-dscp <dscp-list> to
<mark-down-dscp>}
no mls qos map {cos-dscp | dscp-cos | dscp-mutation
<dscp-mutation-name> | ip-prec-dscp | policed-dscp}
Function: Set class of service (CoS)-to-Differentiated Services Code Point (DSCP)