336
13.1.5.3.2 Policy-map Priority Configuration
Click Policy-map priority configuration to entry configure page. It is equivalent to CLI
command 13.1.2.2.6.
All sections describe as following:
z Policy-map name
z Class-map name
z Priority type. DSCP value or IP precedence value
z Priority value
z Operation type. Set or Remove.
To configure Policy-map priority, select p1 to Policy-map name, input c1 to Class-map
name, select IP precedence value to Priority type, input 3 to Priority value, select Set to
Operation type, then click Apply.
13.1.5.3.3 Policy-map Bandwidth Configuration
Click Policy-map bandwidth configuration to entry configure page. It is equivalent to CLI
command 13.1.2.2.7.
All sections describe as following:
z Policy-map name
z Class-map name
z Rate－average baud rate for classified bandwidth, K bit/s per unit.
z Normal burst－burst rate for classified bandwidth, K byte per unit.
z Exceed action－The action for once the data rate exceeds the rate limited, includes