275
(3) Configure manual DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
hardware-address <hardware-address>
[{Ethernet | IEEE802|<type-number>}]
no hardware-address
Specifies the hardware address when
assigning address manually
host <address> [<mask> |
<prefix-length> ]
no host
Specifies the IP address to be assigned
to the specified client when binding
address manually
client-identifier <unique-identifier>
no client-identifier
Specifies the unique ID of the user when
binding address manually
client-name <name>
no client-name
Configures a client name when binding
address manually
3. Enable logging for address conflicts
Command Explanation
Global Mode
ip dhcp conflict logging
no ip dhcp conflict logging
Enables logging for DHCP address to
detect address conflicts
Admin Mode
clear ip dhcp conflict <address | all> Deletes a single address conflict record or
all conflict records
11.2.2.1 bootfile
Command: bootfile <filename>
no bootfile
Function: Set the file name for DHCP client to import on bootup; the “no bootfile ”
command deletes this setting.
Parameter: <filename> is the name of the file to be imported, up to 255 characters are
allowed.
Command Mode: DHCP Address Pool Mode
Usage Guide: Specify the name of the file to be imported for the client. This is usually
used for diskless workstations that need to download a configuration file from the server