
338
Click Apply aggregate policer to entry the configure page. It is equivalent to CLI command
13.1.2.2.9.
All sections describe as following:
z Aggregate policer name
z Policy-map name
z Class-map name
To apply the aggregate policer agg1 by c1 class-map, input the graphic presentation value,
then click Add.
Click Apply QoS to port to entry the configure page, including four sections:
z Port trust mode configuration
z Port default CoS configuration
z Apply policy-map to port
z Apply DSCP mutation mapping
Click Port trust mode configuration to entry the configure page. It is equivalent to CLI
command 13.1.2.2.10.
All sections describe as following:
z Port
z Port trust status-including
9 cos, cos and pass-through-dcsp,
9 dcsp, dcsp and pass-through-cos,
9 ip-precedence, ip-pre and pass-through-cos
z Port priority
z Reset-Will set column as startup defaults. This command will not modify the
configuration.
z Apply-Will take effort to all setting. This command will modify the configuration.