299
11.6.1.7 DHCP network parameter configuration
Click DHCP configuration, DHCP server configuration, DHCP network parameter
configuration. Users can specify DHCP network parameters. See the equivalent CLI
command at 11.2.2.18:
DHCP pool name – Select DHCP pool name
Code(0-254) – Specify network code
Network parameter value type – Configure network parameter value type: ascii, hex
or ip address
Network parameter value – Specify network parameter value
Operation type – Apply or cancel the configuration
For example: Select DHCP pool name to 1; set Code to 72; set Network parameter
value type to ip address; set Network parameter value to 10.1.128.240; set Operation
type to Set network parameter, and then click Apply. The configuration is applied on the
switch.
11.6.1.8 Manual address pool configuration
Click DHCP configuration, DHCP server configuration, Manual address pool
configuration.Users can configure DHCP manual address pool:
DHCP pool name – Select DHCP pool name
Hardware address – Specify hardware address. See the equivalent CLI command at
11.2.2.7
Client IP – Specify client IP address
Client network mask – Specify client network mask. See the equivalent CLI command
at 14.2.2.8
User name(1-255 character) – Specify user name. See the equivalent CLI command
at 11.2.2.2
For example: Select DHCP pool name to 1; set Hardware address to
00-00-e2-3a-26-04; set Client IP to 10.1.128.160; set Client network mask to
255.255.255.0; set User name to 00-00-e2-3a-26-04, and then Apply. The configuration
is applied on the switch.