230
Example:
1. Show radius authenticated-user statistics information.
Switch #show radius authenticated-user count
--------------------- Radius user statistic---------------------
The authenticated online user num is: 1
The total user num is: 1
2. Show radius authenticating-user statistics information and others
Switch #sho radius authencating-user count
--------------------- Radius user statistic---------------------
The authenticating user num is: 0
The stopping user num is: 0
The stopped user num is: 0
The total user num is: 1
8.4.1.5 show dot1x Command: show dot1x [interface <interface-list>]
Function: Display dot1x parameter information, if add parameter information, it will
display dot1x status of relevant port.
Parameter: <interface-list> is port list. If there’s no parameter, will display all port
information
Command mode: privilege configuration mode
Instructions: By using show dot1x command you may check port dot1x relevant
parameters and port dot1x information.
Example:
1.Display switch dot1x global parameters information.
Switch#show dot1x
Global 802.1x Parameters
reauth-enabled no
reauth-period 3600
quiet-period 10
tx-period 30
max-req 2
authenticator mode passive
Mac Filter Disable
MacAccessList :
dot1x-EAPoR Enable