46
2.2.3.5.1 show ssh-user
Command: show ssh-user
Function: Display the configured SSH usernames.
Parameter: Admin Mode
Example:
Switch#show ssh-user
test
Related command: ssh-user
2.2.3.5.2 show ssh-server
Command: show ssh-server
Function: Display SSH state and users which log on currently.
Command mode: Admin Mode
Example:
Switch#show ssh-server
ssh-server is enabled
connection version state user name
1 2.0 session started test
Related command: ssh-server enable, no ssh-server enable
2.2.3.5.3 debug ssh-server
Command: debug ssh-server
no debug ssh-server
Function: Display SSH server debugging information; the “no debug ssh-server”
command stops displaying SSH server debugging information.
Default: This function is disabled by default.
Command mode: Admin Mode
Command: traceroute {<ip-addr> | host <hostname> }[hops <hops>] [timeout
<timeout> ]
Function: This command is tests the gateway passed in the route of a packet from the
source device to the target device. This can be used to test connectivity and locate a failed