2.Disconnect the LCD and internal microphone cables from their system board connectors (LCD1, INTMIC1).
3.Close the computer lid and turn the unit over to the base side.
4.Remove the lower case screws securing the LCD module.
Step | Type | Quantity | Color | Torque |
|
|
|
|
|
4 | M2.5 x L8 BZN+NYLOK | 2 | Black | 3 |
|
|
|
|
|
5.Turn the unit right side up and open the notebook lid again.
6.Remove the hinge screws securing the LCD module.
Step | Type | Quantity | Color | Torque |
|
|
|
|
|
6 | M2.5 x L12 BZN+NYLOK | 2 | Silver | 4 |
40 | Chapter 1 |