Acer M11E 2.9.3 CPU Frequency

2-34 User’s Guide

setting this parameter.

Graphics Aperture Size

This parameter determines the effective size of the graphics aperture.

Graphics aperture is the address range that the AGP video and the CPU

use to manage graphical objects. The lowest setting is 8 MB and the

highest is 256 MB.

Plug and Play OS

When this parameter is set to Yes, BIOS initializes only PnP boot

devices such as SCSI cards. When set to No, BIOS initializes all PnP

boot and non-boot devices such as sound cards.

Set this parameter to Yes only if your operating

system is Windows 95.

Reset Resource Assignments

Set this parameter to Yes to avoid IRQ conflict when installing non-PnP

or PnP ISA cards. This clears all resource assignments and allows

BIOS to reassign resources to all installed PnP devices the next time

the system boots. After clearing the resource data, the parameter

resets to No.

2.9.3 CPU Frequency

This parameter displays your CPU’s speed and bus frequency. It also

allows you to specify the voltage setting for your current CPU. Selecting

this option displays the following screen:

Contents

Main CopyrightCopyright DisclaimerDisclaimer IMPORTANT SAFETYIMPORTANT SAFETY INSTRUCTIONSINSTRUCTIONS Page Page CD-ROM Safety WarningCD-ROM Safety Warning Caution on Lithium BatteriesCaution on Lithium Batteries FCC Class B Radio FrequencyFCC Class B Radio Frequency Interference StatementInterference Statement Page Conventions Table of ContentsTable of Contents Chapter 1 System Board Chapter 2 BIOS Utility Page List of Figures List of Tables Page System Board 1.1 Features Page Page 1.2.1 System Board Layout Page Page Page 1-8Users Guide 1.3.2 Jumper Settings Table 1-1 Jumper Settings 1.3.3 Connector Functions Page 1.4 ESD Precautions 1.5 Installing the Pentium II processor 1.5.1 Attaching the Processor Fan Sink Page Page Page 1.5.2 Installing a Pentium II Processor Page Page Page Page 1.6 Memory Upgrade 1.6.1 Memory Configurations 1.6.2 Installing a DIMM Page Page 1.7 Installing Expansion Cards 1.7.1 Installing PCI Cards 1.7.2 Installing ISA Cards 1.7.3 Installing an AGP Card Page 1.8 Error Messages 1.8.1 Software Error Messages 1.8.2 System Error Messages System Board 1-29 Table 1-4 System Error Messages 1-30 Users Guide Table 1-4 System Error Messages 1.8.3 Correcting Error Conditions Page Setup Utility 2.1 Entering Setup Page 2.2 System Information 2.2.1 Processor 2.2.2 Processor Speed 2.2.3 Internal Cache Size Page Page Page 2.3 Product Information 2.3.1 Product Name 2.3.2 System S/N 2.3.3 Main Board ID Page Page 2.4.2 LS-120 Drive Compatible As 2.4.3 IDE Drives Page Page Page Page 2.5 Onboard Peripherals 2.5.1 Serial Ports 1 and 2 3F8h 2F8h 3E8h 2.5.2 Parallel Port 3BCh 378h Capabilities Port (ECP) as the operation mode. It allows you to 2.5.3 Onboard Device Settings Page Page 2.6 Power Management 2.6.1 Power Management Mode OFF 2.6.2 Power Switch < 4 sec. 2.6.3 System Wake-up Event 2.7 Boot Options 2.7.1 Boot Sequence 2.7.2 First Hard Disk Drive 2.7.3 Fast Boot 2.7.4 Silent Boot 2.7.5 Num Lock After Boot 2.7.6 Memory Test 2.7.7 Configuration Table 2.7.8 Boot from LANDesk Service Agent 2.8 Date and Time 2.8.1 Date Page 2.9 Advanced Options 2.9.1 Memory/Cache Options Enabled 2.9.2 PnP/PCI Options Page Page 2.9.3 CPU Frequency Page 2.10 System Security 2.10.1 Setup Password Page Page Page 2.10.2 Power-on Password 2.10.3 Disk Drive Control 2.11 Load Default Settings 2.12 Abort Settings Change 2.13 Exit Setup