2.Enable the Setup Password parameter in the System Security
menu by pressing the 
or 
arrow key. The Setup Password window appears:
Setup Password
Enter your new Setup Password twice. Setup Password may be up to 7 characters long.
Enter | Password | .............. | [xxxxxxx] |
Enter | Password | again | [xxxxxxx] |
Set or Change Password
3.Type a password in the Enter Password field. The password may consist of up to seven characters.
Be very careful when typing your password because the characters do not appear on the screen.
4.Press 
. Retype your password in the Enter Password again field to verify your first entry.
5.Highlight Set or Change Password and press 
.
6.Press 
to return to the System Security menu and then press 
again to exit Setup. The Exit Setup screen appears:
Exit Setup
Settings have been changed.
Do you want to save to CMOS settings?
[Yes] [No]
Setup Utility |
