Acer M11E manual For system board without LAN, PCI IRQ Setting

For system board without LAN

PnP/PCI Ooptions

PCI IRQ Setting	[ Auto ]
	INTA	INTB	INTC	INTD
PCI Slot 1	[--]	[--]	[--]	[--]
PCI Slot 2	[--]	[--]	[--]	[--]
PCI Slot 3	[--]	[--]	[--]	[--]
PCI Slot 4	[--]	[--]	[--]	[--]
PCI Slot 5	[--]	[--]	[--]	[--]
AGP	[--]
PCI IRQ Sharing	[No]
VGA Palette Snoop	[Disabled]
Graphics Aperture Size ....	[64] MB
Plug and Play OS	[Yes]

Reset Resource Assignments [No ]

PCI IRQ Setting

Select Auto to let BIOS automatically configure the plug-and-play (PnP) devices installed on your system. Otherwise, select Manual.

Refer to your manual for technical information about the

PCI card.

PCI SLOTS

When you set the PCI IRQ Setting parameter to Auto, these parameters specify the auto-assigned interrupt for each of the PCI devices. If you set the PCI IRQ Setting parameter to Manual, you need to specify the interrupt that you want to assign for each PCI device installed in your system.

2-32 User’s Guide